Timing belt Mitsuboshi 500-T5-10
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 500-T5-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 500-T5-10 and any equivalents.
The Mitsuboshi 500-T5-10 is a timing belt with a T5 profile and a 5 mm pitch. It is used in drives where teeth on the belt engage matching pulleys to keep the driven shaft synchronized with the driver. If you are replacing a worn or damaged belt, confirm the profile and pitch before ordering.
T5 profile timing belts are common on light-duty synchronous drives such as small conveyors, packaging equipment, office machines and positioning axes. The trapezoidal tooth shape runs in a matching T5 pulley groove. Because the teeth carry the load, these belts do not rely on friction and do not need high tension to transmit motion.
To confirm fit, read the marking on the back of the old belt. Check that the profile is T5 and the pitch is 5 mm, then measure the pitch length and compare it with the 500-T5-10 part number. Inspect the pulleys for worn teeth, debris in the grooves and correct alignment. If the drive uses more than one belt, replace all belts in the set at the same time.
Dimensions
- Profile
- T5
- Pitch
- 5mm
Frequently asked questions
- What does the 500-T5-10 part number indicate?
- The code identifies a Mitsuboshi timing belt with a T5 profile and a 5 mm pitch. The number before the profile indicates the pitch length in millimeters.
- How do I confirm this belt fits my drive?
- Check the old belt marking for T5 profile and 5 mm pitch. Verify the pulley grooves match the T5 profile, and confirm the required pitch length matches the part number before requesting a quote.
- What should I send for a quote?
- Send the full part number 500-T5-10, the quantity you need, and a photo of the old belt marking if you have one. If you are unsure of the profile or length, include the pulley tooth count and center distance so we can help confirm the correct belt.