Timing belt Mitsuboshi 450-H-100
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 450-H-100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 450-H-100 and any equivalents.
The Mitsuboshi 450-H-100 is a timing belt in the H profile with a 100 in pitch length. The profile sets the tooth geometry that must match your pulleys; the length sets the center distance the drive can span. Both values are read directly from the belt's own part number, so confirming them against the drive is the first step.
For a maintenance or purchasing professional, the H profile is the controlling dimension here. A synchronous belt only drives correctly when its tooth profile matches the pulley grooves, so the H designation has to agree with what is on the machine before anything else is checked. The 100 in pitch length then determines whether the belt will fit the existing pulley centers without moving either shaft.
When you replace a timing belt, compare the marking on the back of the old belt with the part number on this page. If the old belt reads 450-H-100, this is the same profile and length. If the drive runs more than one belt, inspect the full set and the pulleys at the same time so the replacement goes back on a drive that is in condition to run.
We carry the Mitsuboshi 450-H-100 and quote it by part number. Send the part number, the quantity, and a photo of the belt marking or the drive if you want the profile and length confirmed before you order.
Dimensions
- Profile
- H
Frequently asked questions
- What do the H profile and the 100 in pitch length mean on this belt?
- The H is the tooth profile, which must match the pulley grooves on your drive. The 100 in figure is the pitch length, the distance the belt spans around the pulleys. Both are stated in the part number, and both need to match the drive before the belt is fitted.
- How do I confirm this is the belt on my machine?
- Read the marking on the back of the old belt and compare it with 450-H-100. If the profile and the pitch length agree, you have the same belt. If the marking is worn or unreadable, send us a photo of the belt and the drive and we will help confirm it.
- What should I send to get a quote?
- Send the part number 450-H-100 and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include a photo of the belt marking or the pulleys, and we will confirm the right belt or suggest an equivalent.