Timing belt Mitsuboshi 424-H8M-10
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 424-H8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 424-H8M-10 and any equivalents.
The Mitsuboshi 424-H8M-10 is a timing belt built on the HTD 8M profile with an 8 mm pitch. This page covers what the profile and the part number tell you before you request a quote.
The HTD 8M profile is a synchronous belt profile with an 8 mm pitch, so the tooth spacing is fixed by the profile rather than by the individual belt. The 424 in the part number gives the belt length in millimeters, which is the figure to match against the old belt and the drive layout. The 10 indicates the belt width code used by the manufacturer.
For a maintenance or purchasing professional, the practical check is simple: confirm the drive uses an HTD 8M profile, confirm the required length is 424 mm, and confirm the width code on the existing belt. If the marking on the back of the old belt matches 424-H8M-10, this is the belt to quote.
Send the part number 424-H8M-10 by WhatsApp or email and the team will confirm the belt or suggest an equivalent. If the old belt marking is worn or unreadable, send the profile, the length and the width code from the drive documentation instead.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
Frequently asked questions
- What does the 424-H8M-10 part number tell me?
- It identifies a Mitsuboshi timing belt on the HTD 8M profile, with a length of 424 mm and an 8 mm pitch. The width code is 10.
- How do I confirm this is the right belt for my drive?
- Check that the drive uses the HTD 8M profile and that the required belt length is 424 mm. Then match the width code on the existing belt to the 10 in this part number.
- What should I send to request a quote?
- Send the part number 424-H8M-10 by WhatsApp or email. If the old belt marking is not readable, send the profile, length and width code from the drive instead.