V-belt Mitsuboshi 3V 670
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 670 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 670 and any equivalents.
This Mitsuboshi belt is a narrow wedge V-belt with a 3V profile and a 670 mm length. The 3V profile identifies a narrow cross-section, and the 670 mm length gives you the datum length to compare against your drive. Use both numbers together when checking a replacement.
The 3V profile is a narrow wedge cross-section, often chosen where a standard V-belt would take up more width. The 670 mm length is the figure to match against the belt you are replacing. If your drive uses a 3V section, this belt is sized for that groove.
The same size is also listed under Stark 3V 670, Optibelt 3V 670, and Dayco 3V 670. That gives you alternate part numbers to search when only one brand is on the shelf tag or in the maintenance log.
To request a quote, send the part number 3V 670, the quantity, and the drive it runs on. If you are unsure whether a 3V belt is correct, send a photo of the old belt's back marking and the pulley grooves, and the team can confirm the profile and length.
Dimensions
- Section
- 3V
Frequently asked questions
- What does the 3V profile mean on this belt?
- The 3V profile is a narrow wedge V-belt cross-section. It is narrower than a classic V-belt profile, so it fits pulleys machined for 3V grooves.
- How do I confirm the 670 mm length is right for my drive?
- Check the marking on the back of your old belt. If it reads 3V 670, this belt matches that length. If you cannot read it, measure the old belt and compare it to 670 mm.
- What should I send to get a quote for this belt?
- Send the part number 3V 670, the quantity you need, and any details about the drive. If you have the old belt, a photo of its back marking helps confirm the profile and length.