V-belt Mitsuboshi 3V 1400
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 1400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 1400 and any equivalents.
This Mitsuboshi 3V 1400 is a narrow wedge V-belt with a 3V profile and a 1400 mm length. It is used in industrial drives that call for a 3V cross-section, such as fans, pumps, compressors and other equipment where a compact, high-capacity belt is required. Confirm fit by checking the old belt's marking or measuring the profile and length.
Narrow wedge belts like this 3V 1400 are common on drives where space is limited and the pulley grooves are cut for a 3V section. The 3V profile is narrower than a classical V-belt, so it will not seat correctly in a standard A, B or C groove. The 1400 mm length is the datum length; if the old belt is stretched or worn, measure the drive or compare against the original marking.
To confirm this is the right belt, look for the part number on the back of the old belt. If it reads 3V 1400, this Mitsuboshi belt matches that profile and length. The same size is also listed under Stark 3V 1400, Optibelt 3V 1400 and Dayco 3V 1400. When replacing, inspect the pulleys for wear and check that all belts on a multi-belt drive are replaced as a set.
If the marking is unreadable, send the drive details and any measurements you have. We carry the Mitsuboshi 3V 1400 and can help confirm the correct belt or suggest an equivalent based on the profile and length. Request a quote by part number via WhatsApp or email.
Dimensions
- Section
- 3V
Frequently asked questions
- How do I confirm that this 3V 1400 belt fits my drive?
- Check the marking on the back of the old belt. If it shows 3V 1400, this belt matches the profile and length. You can also measure the top width and the datum length, but the marking is the most reliable reference.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts on a multi-belt drive at the same time. Mixing new and worn belts can cause uneven tension and lead to premature failure. Inspect the pulleys for wear while the belts are off.
- What information should I send for a quote?
- Send the part number 3V 1400 and the quantity you need. If you are unsure about the size, include the old belt marking or the drive details so we can help confirm the right belt.