V-belt Mitsuboshi 3V 1000
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 1000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 1000 and any equivalents.
This Mitsuboshi 3V 1000 is a narrow wedge V-belt with a 3V profile and a 1000 mm length. It is used in industrial drives where a compact, high-capacity belt is required. To match it to the belt being replaced, confirm both the profile and the length.
Start by reading the marking on the old belt. You are looking for the profile, 3V, and the length, 1000 mm. If the old belt is worn or the marking is difficult to read, measure the outside length and compare it to 1000 mm. The 3V profile identifies the cross-section and the 1000 mm length identifies the belt's size.
This belt is also listed under other brands in the same size: Stark 3V 1000, Optibelt 3V 1000 and Dayco 3V 1000. If you find one of those markings on the belt you are replacing, this Mitsuboshi 3V 1000 is the same size. We carry the Mitsuboshi 3V 1000 and can help confirm it is the correct belt for your drive.
When you request a quote, send the part number 3V 1000 and, if possible, the old belt's marking. If the drive uses multiple belts, note how many are needed so we can help you replace them as a set.
Dimensions
- Section
- 3V
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are replacing. It should show the 3V profile and a 1000 mm length. If it does, this Mitsuboshi 3V 1000 matches that size.
- What should I send to request a quote?
- Send the part number 3V 1000 and the quantity you need. If you have the old belt, include a photo of its marking so we can help confirm the profile and length.
- Can you help if I find a different brand marking on the old belt?
- Yes. The same size is also listed under Stark 3V 1000, Optibelt 3V 1000 and Dayco 3V 1000. If your old belt shows one of those, this Mitsuboshi 3V 1000 is the same size.