Timing belt Mitsuboshi 360-H-100
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 360-H-100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 360-H-100 and any equivalents.
When you need a replacement timing belt, the most reliable starting point is the marking on the old belt. The Mitsuboshi 360-H-100 is a timing belt with an H profile. This page covers what to look for on the belt back so you can confirm the correct part.
The marking on the back of a timing belt typically shows the part number, which includes the profile and the length. For the Mitsuboshi 360-H-100, the profile is H. If the old belt is worn or dirty, clean the back with a rag so the characters are readable. Take a photo of the marking and note the full part number exactly as it appears.
Once you have the part number, you can compare it to the Mitsuboshi 360-H-100. This belt is also listed under the same size by Stark as 360-H-100. That means if you see Stark 360-H-100 on the old belt, it is the same size. Always verify the profile and part number before ordering.
If the marking is missing or unreadable, measure the belt width and pitch length, or count the teeth if possible. Send the part number or the measurements to our team via WhatsApp or email. We carry the Mitsuboshi 360-H-100 and can help confirm it matches your drive.
Dimensions
- Profile
- H
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for a series of numbers and letters printed on the back of the belt. The marking usually includes the part number, which indicates the profile and length. For example, 360-H-100 is a timing belt with an H profile. Write down the full marking exactly as shown.
- What if the marking on my belt is worn off?
- If the marking is not readable, measure the belt width and the pitch length, or count the teeth. Provide those measurements along with any other identifying marks. Our team can then help match the belt to the Mitsuboshi 360-H-100 or an equivalent size.
- Is the Mitsuboshi 360-H-100 the same as Stark 360-H-100?
- The same size is also listed under the Stark brand as 360-H-100. That means the profile and part number match, so either marking indicates the same size. Always confirm the profile and part number before ordering.