Timing belt Mitsuboshi 1760-H8M-10

MITSUBOSHI 1760-H8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1760-H8M-10 and any equivalents.

This Mitsuboshi timing belt is identified by the part number 1760-H8M-10. It has an HTD 8M profile and an 8 mm pitch, which are the key dimensions to confirm before ordering. Use this page to verify that the belt matches your drive.

Timing belts in the HTD 8M profile are common on industrial drives where synchronization between the pulley and the belt is required. The 8 mm pitch defines the distance between tooth centers, so the pulley must be cut to the same HTD 8M profile and pitch. The part number 1760-H8M-10 also carries a length code that corresponds to the belt's length in millimeters.

To confirm fit, read the marking on the back of the old belt and compare it with 1760-H8M-10. Check that the drive uses HTD 8M pulleys and that the belt width matches the pulley grooves. If the old belt is worn or the marking is unreadable, measure the pitch and count the teeth to cross-check the profile and length before requesting a quote.

Send the part number 1760-H8M-10 by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include a photo of the old belt marking and the pulley profile. The team can confirm the right belt or suggest an equivalent based on the data you provide.