Timing belt Mitsuboshi 1320-T10-10
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 1320-T10-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1320-T10-10 and any equivalents.
The Mitsuboshi 1320-T10-10 is a timing belt with a T10 profile and a 10 mm pitch. When you are replacing a belt, the most reliable reference is the marking printed on the back of the belt you are removing. This page covers how to match that marking to the 1320-T10-10 and what to send when you request a quote.
Start by reading the back of the old belt. Look for the profile and the part number, and compare them with the T10 profile and the 1320-T10-10 code. If the marking is worn away, check the drive for any documentation or a spare belt that still shows the number. A belt with the same profile and part number is the direct match for the one being replaced.
If you cannot find a marking, note the profile and pitch from the drive specification. The 1320-T10-10 has a T10 profile and a 10 mm pitch, so any replacement must carry the same profile and pitch. Do not rely on a belt that only looks similar; the profile and pitch are what locate the teeth in the pulley grooves.
When you request a quote, send the part number 1320-T10-10 and the quantity you need. If the old belt is unmarked, send the profile, the pitch and the part number from any documentation you have. Our team can confirm the belt or suggest an equivalent based on that information.
Dimensions
- Profile
- T10
- Pitch
- 10mm
Frequently asked questions
- How do I know if the 1320-T10-10 is the right replacement?
- Compare the marking on the back of your old belt with the 1320-T10-10. The profile must be T10 and the pitch must be 10 mm. If the marking matches, it is the direct replacement.
- What if the marking on my old belt is unreadable?
- Check the drive documentation or any spare belt for the part number. If none is found, note the profile and pitch from the drive specification and send those details with your quote request.
- What should I include when requesting a quote?
- Send the part number 1320-T10-10 and the quantity required. If you are unsure of the number, include the profile, pitch and any other marking from the old belt so we can confirm the correct item.