MCGILL VCYR 5 1/2 cam follower
- Brand
- McGILL
- Category
- Bearings
- Subcategory
- Cam follower and support roller
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
McGILL VCYR 5 1/2 belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for VCYR 5 1/2 and any equivalents.
For mechanisms that convert cam rotation into linear movement or need low-friction guidance, the McGill VCYR series cam follower provides a roller bearing with a specialized outer profile. It mounts on a shaft and runs directly against a cam, guide, or raceway, handling radial loads and tilting moments in actuation, transport, and positioning systems.
The code breaks down into the base VCYR family and the size number: VCYR 4 1/2, VCYR 5 1/2, and VCYR 6 1/2 indicate nominal roller sizes. Suffixes after the number denote sealing, profile variations, or shaft type. To confirm the exact reference, have your drawing or the roller and bore dimensions ready—we verify the correct code from that data.
These followers appear in machine tool cams, transfer systems, presses, packaging equipment, and material handling lines. Slide guides and lifting mechanisms with radial loads and reciprocating motion also use them. Because alignment and raceway condition affect performance, inspect both before replacement; a worn cam will shorten the life of any new bearing.
Selection depends on roller outside diameter, width, and mounting style. The VCYR series manages considerable radial loads; for axial loads or moments, consider a support bearing configuration. Sealed variants protect against dust and chips in dirty environments. Use lubricant rated for the operating temperature, and ensure the roller turns on its shaft without excessive play. Proper alignment avoids lateral stresses.
Cam followers are identified by designation and dimensions, not a universal code. McGill is a reference in this component type, and MR Industrial Accessories supplies its line as a brand. For a replacement from another source, send the main dimensions and mounting type; we help find the equivalent McGill reference within the VCYR series.
To request a quote for a McGill VCYR series cam follower, send the complete code—such as VCYR 4 1/2—or the roller and bore dimensions via WhatsApp or email. We reply promptly with the reference and alternatives in the series. If the exact variant is unclear, write to us anyway: with the code or model you need, we look for the best fit for your mechanism.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How does a cam follower differ from a standard bearing?
- A cam follower has an outer profile made to roll directly on a cam or guide, and its own shaft mounts in the mechanism. A standard bearing sits in a housing and is not designed for that direct contact. This is why the follower better withstands radial load and raceway wear.
- What do I need to choose the right VCYR code?
- You need the roller outside diameter, the width, and the mounting bore diameter. With those dimensions and the code from the drawing or old part, we confirm the equivalent VCYR reference. If you lack the code, send the dimensions and we identify it.
- How often should a McGill cam follower be lubricated?
- Frequency depends on speed, load, and environment. Under normal conditions, follow your equipment maintenance plan; in dusty or high-temperature environments, shorten the intervals. Use the grease recommended by the machine manufacturer and check that the seal does not leak lubricant.