MCGILL MCF 62A cam follower
- Brand
- McGILL
- Category
- Bearings
- Subcategory
- Cam follower and support roller
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
McGILL MCF 62A belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MCF 62A and any equivalents.
A cam follower from the MCGILL MCF A line is a roller bearing built around a threaded stud, so it mounts straight onto a cam track or a linear guide and carries radial load while the motion reverses back and forth. Where a mechanism needs a cam follower that installs easily and holds up in service, this series is a common choice. MR Industrial Accessories supplies this line to industrial users throughout the United States and in several Latin American countries.
Reading the code is the quickest way to narrow down a part number. MCF marks the family, the digits that come after it give the roller's outside diameter in millimeters, and the trailing A points to one particular construction within that family. So the diameter your mechanism calls for, together with the load and speed it will see, is what drives the selection.
Typical service includes drive cams, guideways on machine tools, conveying systems and packaging machinery. The threaded stud is what makes the design practical: the follower fastens directly to a plate or frame, which keeps adjustment and replacement simple when maintenance comes around.
Before ordering, confirm the outside diameter, the roller width and which sealing option the position requires. Alignment at mounting matters, since misalignment introduces axial load the follower is not meant to carry. Lubrication also deserves attention: use clean lubricant in the right quantity and follow the manufacturer's guidance. In dirty or exposed locations, a variant with heavier sealing is worth considering.
Interchange with other brands is possible when the principal dimensions, stud type and load capacity line up. The variants are not all mutually replaceable, so the specifications should be checked before a component is swapped out. Sharing the full part number along with your operating conditions lets us point you to a suitable equivalent.
For a cam follower for your application, send the part number or model through WhatsApp or email. Our team can suggest equivalents and help you choose, and we reply promptly with what you need to move forward.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How is the MCF A code structured?
- MCF identifies the series, the digits give the roller's outside diameter in millimeters, and the A at the end denotes a construction variant. As an example, MCF 40A corresponds to a 40 mm outside diameter.
- What information helps you recommend the right cam follower?
- The outside diameter your mechanism requires, the roller width, the radial loads and the operating speed are the starting points. It also helps to know whether contamination calls for special sealing. With those details we can suggest the most suitable MCF A part number.
- Can a MCGILL cam follower replace one from another brand?
- It can when the main dimensions, the stud type and the load capacity correspond. Since not every variant is interchangeable, verify the technical specifications before substituting a component.