MCGILL CFE 1 1/8 cam follower
- Brand
- McGILL
- Category
- Bearings
- Subcategory
- Cam follower and support roller
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
McGILL CFE 1 1/8 belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CFE 1 1/8 and any equivalents.
The MCGILL CFE series is an inch-series cam follower that mounts on a shaft or stud and rolls directly against a cam, rail or guide. It turns cam motion into linear displacement or keeps moving parts on track with low friction. MR Industrial Accessories supplies this line to industrial plants that need precise, durable rolling.
The CFE code is based on nominal outside diameter in inches. Sizes run from one inch to one and seven-eighths inches: CFE 1, CFE 1 1/8, CFE 1 1/4, CFE 1 3/8, CFE 1 1/2, CFE 1 5/8, CFE 1 3/4 and CFE 1 7/8. The number after CFE gives that measurement, and this series carries no extra letters. For a correct match, use the full part number from the drawing or the original component.
Typical applications include machine tool cams, linear guides, conveyors, presses, packaging equipment and reciprocating motion systems. Because the dimensions follow inch practice, these cam followers are often found on imported machinery or equipment built to US specifications.
When selecting a CFE roller, check the outside diameter, the stud or mounting shaft type, and the sealing needed for the operating environment. Correct lubrication and accurate alignment with the raceway help extend service life. For combined loads or high speeds, confirm the load capacity and internal clearance. During installation, avoid impacts that could damage the rollers or raceways.
MCGILL CFE series cam followers can be interchanged with equivalent inch-nomenclature products from other brands. To find a replacement, compare the main dimensions, the sealing type and the load capacity.
Send the part number of the cam follower you need by WhatsApp or email and the team will reply promptly with a quote. MR Industrial Accessories can also suggest equivalents and help you choose the right component for the application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the CFE designation mean on MCGILL cam followers?
- CFE identifies an inch-series cam follower. The number that follows is the nominal outside diameter in inches, such as CFE 1 or CFE 1 1/2. Provide the complete part number to identify the exact size.
- How do I choose the right cam follower for my machine?
- Look at the outside diameter, the mounting type, the sealing and the lubrication. Also verify the load and operating speed. If you are unsure, send the dimensions or the original part number and we will advise you.
- Do MCGILL CFE rollers have equivalents from other brands?
- Yes, they can be interchanged with rollers from other brands that use the same inch nomenclature. To confirm compatibility, compare dimensions, sealing and load capacity. Ask us on WhatsApp if you need help.