MCGILL BCCFE 1/2 S cam follower
- Brand
- McGILL
- Category
- Bearings
- Subcategory
- Cam follower and support roller
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
McGILL BCCFE 1/2 S belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCCFE 1/2 S and any equivalents.
The McGill BCCFE S cam follower is a roller bearing built to carry motion through cams, guides and lifting systems. Its CAMROL bushing design handles radial and axial loads in tough working conditions. You will find it on agricultural machinery, material handling equipment and production lines. MR Industrial Accessories supplies this brand and can help you match the right model to your application.
Reading the code helps you order correctly. BCCFE marks the cam follower family that uses a CAMROL bushing. The trailing S tells you the outer roller is steel. The digits between the two letters give the outside diameter in inches, so the size and type of roller are easy to identify at a glance.
These cam followers show up across many industries. In agriculture they guide chain and belt movement on seeders and harvesters. In material handling they appear on conveyors and elevators, and they are also found on road and construction machinery. Because they take combined loads, they suit drive cams, support rollers and guiding systems on automated production lines.
Selection comes down to a few points: the outside diameter your application requires, whether the load is radial, axial or combined, and the conditions where the part will run. The S sealing keeps contaminants out, which helps service life in dusty or humid environments. At assembly, verify shaft alignment and cam perpendicularity, since misalignment speeds up wear. Correct lubrication and the right internal clearance also matter for smooth, long-lasting operation.
On interchangeability, McGill BCCFE S cam followers can be replaced by other brands that use the same inch outside diameter nomenclature and bushing configuration. Still, check the critical dimensions and load capacities before you swap a component, because tolerances and materials can differ. If anything is unclear, our technical team can compare the alternatives for you.
To request a quote on a McGill BCCFE S cam follower, send the complete part number by WhatsApp or email. We reply promptly with what you need for your order, and we can also advise you on a specific variant that is not shown in the listing.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the S stand for in the BCCFE S series?
- The S means the outer roller is made of steel, a common configuration in McGill cam followers. That gives it wear resistance and suits applications with moderate to high loads. Ask us by WhatsApp if you need a different configuration.
- How do I pick the right diameter for my application?
- The outside diameter depends on the space available and the load the cam follower must carry. In the designation, the numbers give the diameter in inches, so 1 1/2 S equals one and a half inches. Send us your equipment measurements and we will help you select.
- Can they replace cam followers from other brands?
- They may interchange with products from other brands that share the same nomenclature and critical dimensions. Always verify tolerances and load capacities before replacing. If you are unsure, send us the original part number and we will advise you.