LINK-BELT ZST95075MM18 take-up bearing

LINK-BELT ZST95075MM18 belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZST95075MM18 and any equivalents.

Link-Belt 5000 series take-up units are mounted assemblies that pair an insert bearing with a steel housing to control tension in belt and chain drives. They are common on conveyors, elevators and other machinery where consistent tension adjustment is necessary. MR Industrial Accessories LLC supplies this line and assists with choosing the right configuration for your equipment.

The code for these units begins with ZST, which designates the take-up unit family. The digits that follow set the size and load capacity, while the MM suffix and final number point to mounting, sealing or housing variations. In the 5000 series you will see references such as ZST55040MM18, ZST65050MM18 and ZST95075MM18. Each code packs the shaft diameter, internal bearing type and fastening style into one string, so reading the logic helps you order the correct replacement without guesswork.

These take-up units are used in belt conveyors, bucket elevators, packaging belts and processing lines, as well as in mining, cement, food and logistics equipment. In those settings, stable belt tension prevents misalignment and early wear. Because they arrive as complete mounted units, installation is simpler and maintenance time is shorter than with loose components assembled on site.

When selecting a unit, check the shaft diameter, the load type (radial, axial or combined) and the operating environment. Sealing deserves attention: in dusty, wet or washdown conditions, reinforced protection is recommended. Also verify internal clearance and lubrication method, as many units accept periodic greasing or come with lifetime lubricant. Correct alignment and proper belt tension help extend bearing service life.

Link-Belt 5000 series take-up units can be interchanged with units from other manufacturers that share the same mounting standard and critical dimensions. Interchangeability is not just about shaft diameter: total height, distance between mounting holes and internal bearing type must also be compared. A compatible alternative can often be found.

To request a quote, send the complete code by WhatsApp or email to MR Industrial Accessories LLC. If you do not have it, provide the shaft dimensions, the distance between holes and a photo of the assembly. The team replies promptly with the reference you need or a suitable equivalent.