LINK-BELT ZP6075MMF flange bearing 4 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 6000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT ZP6075MMF belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZP6075MMF and any equivalents.
LINK-BELT ZP MMF series flange housings are 4-bolt units that mount the bearing directly to a flat machine or structure surface. They suit rigid, compact installations where the shaft runs perpendicular to the mounting plane. MR Industrial Accessories LLC supplies this LINK-BELT line and can help you choose the right variant based on shaft diameter and load type.
The part number breaks into blocks. ZP marks the 4-bolt flange family. The first digits give the series, grouping different housing capacities. The next two digits specify the size within that series, and the MMF suffix defines the sealing and mounting configuration for this line. That is how references like ZP5050MMF, ZP5065MMF, and ZP6045MMF coexist: same family, different series and size.
You will find these housings on belt conveyors, bucket elevators, mixers, mills, and process equipment. Food and beverage plants favor them for cleanability and sealing; cement, aggregates, and mining operations choose them for dust and vibratory load resistance. They also appear in oilseed processing and water treatment. In every case, the 4-bolt flange provides flat, repeatable mounting on sheet metal or cast iron.
Selection starts with shaft diameter and load type: pure radial or combined. Match the seal to the environment—dust, water, or frequent washdown calls for tighter barriers. During installation, set the flange on a clean, flat surface, tighten the four bolts in a cross pattern, and check shaft alignment before final torque. Renew lubrication according to duty cycle and temperature. A misaligned housing shortens bearing life even when the unit itself is correct.
When interchanging, compare 4-bolt flange housings by series, shaft diameter, and hole spacing, not just part number. LINK-BELT, Rexnord, and other lines have functional equivalents, but mounting dimensions can differ by a few millimeters and affect replacement. To replace an existing unit, send the old part number and flange dimensions; we will identify the compatible alternative.
MR Industrial Accessories LLC supplies LINK-BELT. If you need a ZP MMF housing, message us on WhatsApp with the full part number, such as ZP5070MMF, or with your current flange dimensions. We will quote promptly and help you define the variant that fits your equipment.
Dimensions
- Bore
- 75.00 mm
Frequently asked questions
- How do I identify the LINK-BELT housing I need?
- Check the part number stamped on the part: ZP means 4-bolt flange, the first digits indicate the 5000 or 6000 series, and MMF is the configuration suffix. If you cannot find it, measure the shaft diameter and the distance between flange holes.
- What is the difference between the 5000 and 6000 series?
- They are two housing families within the ZP MMF line, with different capacities and flange dimensions. The choice depends on shaft diameter and equipment loads. Send us the part number or dimensions and we will tell you which one applies.
- Can I replace a housing from another brand with a LINK-BELT one?
- Often yes, because 4-bolt flange housings are compared by shaft diameter and hole spacing. Still, verify mounting dimensions. Send the old part number and dimensions and we will give you the compatible alternative.