LINK-BELT ZNT62050MM take-up bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 2000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT ZNT62050MM belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZNT62050MM and any equivalents.
A LINK-BELT take-up mounted bearing arrives as one assembly: the bearing insert already fitted into a housing made to hold tension on belts, chains and conveyors. It suits equipment where stretch has to be taken up or tension reset without a complicated procedure. MR Industrial Accessories LLC supplies this line in a range of sizes and configurations.
Reading a ZNT code is straightforward once you know the blocks. The letters ZNT mark the take-up mounted bearing family. The digits after them carry the size and the mounting variant. Codes such as ZNT62050MM, ZNT65050MM and ZNT66045MM belong to the ZNT6000 series, while ZNT72055MM, ZNT75055MM, ZNT76050MM and ZNT76055MM sit in the ZNT5000 series. The MM suffix points to construction details that vary by series, including the sealing arrangement or the housing material. The complete code is what identifies the exact reference.
Typical installations include belt conveyors, sorting belts, bucket elevators and belt drive systems in food, cement, mining and logistics operations. They also show up on material handling equipment in ports and warehouses. In meat processing, aggregate plants and packaging lines, keeping tension steady helps belts last longer and cuts downtime caused by misalignment.
Selection comes down to four things: the radial and axial load the unit will see, the rotation speed, the working environment and the mounting dimensions. Where dust or moisture is present, a reinforced seal is the better choice. At elevated temperatures, confirm the lubricant is suitable. During installation, line the housing up with the belt shaft and set tension as the manufacturer recommends. Regular lubrication and periodic checks of the clearance help avoid premature failure.
Interchange with other brands is possible when the mounting dimensions, load capacity and fastening type line up. A similar code alone does not confirm a match; the housing geometry and shaft diameter still have to be compared. MR Industrial Accessories LLC can help you identify a compatible alternative that will not compromise how the equipment performs.
To get a quote, send the code or the dimensions by WhatsApp or email. The team replies promptly and can also review other variants within the same series to fit your equipment.
Dimensions
- Bore
- 50 MM
Frequently asked questions
- What does ZNT indicate in these bearings?
- ZNT is the designation for the take-up mounted bearing family. The following digits give the size and mounting variant, while the MM suffix covers series-specific construction details such as sealing or housing material.
- How do I select the correct take-up bearing for my machine?
- Start with the radial and axial load, the rotation speed and the environment the unit works in. Then confirm the mounting dimensions and shaft diameter. With those details, we can point you to the exact reference.
- Is a LINK-BELT take-up bearing a direct replacement for another brand?
- It can be, provided the mounting dimensions, load capacity and fastening type correspond. Matching codes are not sufficient on their own; compare the housing geometry and shaft diameter as well. We can advise on the equivalent.