LINK-BELT ZB2040MM flange bearing 4 holes

LINK-BELT ZB2040MM belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZB2040MM and any equivalents.

LINK-BELT 2000 series flange brackets combine a bearing and a 4-bolt flange in one mounted unit. They support rotating shafts on flat surfaces in conveyors, mixers, pumps, fans and other process equipment. The flange lets you fasten the unit with four bolts and center the shaft without machining the housing.

The 2000 series code breaks down into sections. Take ZB2040MM: the first letters denote the bracket style and sealing arrangement, the middle digits give the shaft size, and the ending shows construction or material options. The series covers multiple shaft diameters under the same 4-bolt flange design. To pick the right one, send the full code from the nameplate or bracket body.

You will find these brackets in food and beverage plants, water treatment, cement, mining and material handling. They appear on belt and chain conveyors, bucket elevators, horizontal mixers, blowers and process equipment that requires shaft support on a flat face. The 4-bolt flange makes installation and replacement straightforward: you remove the whole unit without taking apart the shaft or the machinery.

When selecting a bracket, consider shaft diameter, load type (radial, axial or combined) and operating environment. The sealing system determines protection against dust, water and process media: choose labyrinth or oil seal based on the conditions. Use the lubricant specified for the built-in bearing and relubricate periodically to extend service life. Align the flange with the shaft to avoid parasitic stresses; check the flat support and bolt tightness.

Flange brackets from various brands with standardized dimensions are available. Interchangeability depends on shaft diameter, hole spacing and mounting type. A bracket from another brand with the same shaft size and flange can often replace the original, but verify center height and sealing system. If the exact code is hard to find, message us on WhatsApp with the shaft size and a photo of the mounting.

MR Industrial Accessories LLC supplies the LINK-BELT line. For a 2000 series flange bracket, send the code via WhatsApp or email—ZB2040MM, ZB2045MM, ZB2050MM or whatever you have—and we will quote it promptly. We will also suggest a compatible alternative if you need a specific variant.