LINK-BELT ZA2070MM72 pillow block bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 2000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT ZA2070MM72 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZA2070MM72 and any equivalents.
Link-Belt ZA series pillow blocks are rigid mountings designed to hold a bearing and anchor it to the machine frame. They appear in conveying and power transmission setups where stable, aligned support is essential. MR Industrial Accessories LLC supplies this line in a range of shaft sizes and mounting styles.
The ZA code itself carries useful information. Take ZA2035MM72, ZA2040MM72 and ZA2045MM72: the middle digits point to shaft size and load capacity, while the MM72 ending covers sealing, material or locking details. The most reliable way to match a replacement is to compare the complete code against the one on the existing unit.
Typical installations include belt conveyors, bucket elevators, mills, mixers and process equipment in food, chemical and aggregate operations. These environments expose housings to dust, moisture and radial loads, so the mounting must be built to handle those conditions. The series accommodates bearings of different sections, all using bolt fastening with adapter or set screw locking.
Selection starts with shaft diameter, radial and axial load, and the bearing that will sit inside the housing. Look at sealing options as well: single or double lip seals offer added protection where particles are present. During installation, align the pillow block with the shaft centerline and tighten the mounting bolts evenly. Use the lubricant specified for the internal bearing, and verify clearance and concentricity before start-up.
Link-Belt pillow blocks can be swapped with other brands of pillow block mountings that follow the same fastening standard and shaft dimensions. For a quote, send the full pillow block code and, when available, the bearing code it carries. MR Industrial Accessories LLC can suggest an equivalent from its pillow block and bearing range.
Need a pillow block for your equipment? Send the code or model by WhatsApp or email. Our team replies promptly, quotes the item and points you to the compatible alternative for your application. We also manufacture split plummer block housings to order when a standard mounting does not fit.
Dimensions
- Bore
- 70.00 mm
Frequently asked questions
- What does the code ZA2035MM72 indicate?
- It identifies a ZA series pillow block. The central numbers relate to shaft size and capacity, while MM72 refers to sealing or locking variants. To confirm equivalence, compare the full code with the original equipment.
- How do I pick the correct pillow block for my shaft?
- Measure the shaft diameter and identify the bearing to be housed. Then consider radial and axial load and the working environment to choose the sealing. With those details, we can point you to the matching ZA pillow block.
- Are there equivalents to Link-Belt pillow blocks from other brands?
- Yes, pillow block mountings are often interchangeable between brands that share the fastening standard and shaft dimensions. Send us the original pillow block code and we will advise on the exact equivalent.