LINK-BELT W2B08EL insert bearing
- Brand
- LINK-BELT
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT W2B08EL belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for W2B08EL and any equivalents.
The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, intended for installation in split plummer block housings and wall units. It supports rotating shafts where alignment and sealing are required. MR Industrial Accessories supplies this line, offering various shaft sizes and locking configurations.
The code W2B08EL breaks down into distinct parts: the first letter W denotes the insert series, the digit 2 specifies the locking type, the letter B relates to the shaft diameter, and EL indicates the sealing method. In the 200 series, the number after the locking letter—such as 08—represents the nominal shaft size in inches. When requesting a quote, provide the full code or the shaft size you need.
These inserts are commonly installed in split plummer block housings, flange units, and take-up frames. They appear in conveyor belts, mills, mixers, centrifugal pumps, and various plant equipment. In agricultural settings, they are found in seeders and harvesters, where dust and weather conditions demand reliable sealing. The 200 series accommodates multiple shaft sizes and is a frequent choice for maintenance operations.
Selection depends on the shaft diameter, the locking method—set screw, eccentric, or adapter—and the sealing required for the operating environment. During mounting, clean the shaft, remove any burrs, and align the housing before tightening. Proper lubrication and periodic re-tightening of the set screws help extend the insert's life. If the equipment runs with vibration, inspect the play and the condition of the raceway.
200 series inserts can be interchanged between brands based on shaft size and locking type. LINK-BELT, SKF, FAG, NTN, and Timken offer equivalent lines, but seals and tolerances differ. Matching the diameter alone is insufficient: check the inner ring width and the adjustment system. If uncertain, send us the original code and we will identify a compatible alternative.
To request a quote for your LINK-BELT 200 series insert bearing, contact us on WhatsApp with the code—for example, W2B08EL—or provide the shaft size and housing type. At MR Industrial Accessories, we will respond promptly with the option you need.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- What does the code W2B08EL indicate?
- The W stands for the insert series, the 2 for the locking type, B for the shaft diameter, and EL for the sealing. The 08 corresponds to the nominal shaft size in inches. Send the complete code to request a quote for the exact reference.
- How do I select the right insert for my equipment?
- You need the shaft diameter, the locking type, and the working environment. With that information, we will recommend the appropriate 200 series insert. If you have the old code, we can cross-reference it with the LINK-BELT line.
- Can it be replaced by another brand?
- Yes, equivalents exist in SKF, FAG, NTN, and Timken. However, matching the diameter is not enough: verify the inner ring width and the adjustment system. Send us the code and we will indicate a compatible alternative.