LINK-BELT TH3CL2M60N take-up bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 212
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT TH3CL2M60N belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TH3CL2M60N and any equivalents.
A mounted take-up bearing from the Link-Belt THCL line keeps chain and belt drives under the tension they need. It sits on the slack side of the drive, so the take-up travel can be adjusted in place instead of tearing the assembly apart. That helps hold alignment and reduces strain on chains, belts and bearings. MR Industrial Accessories LLC supplies this line to customers in the United States and Latin America.
The part number is built in blocks. TH marks the take-up bearing type, CL the mounting configuration, M the fastening system and N the finish or sealing variant. The digits in the middle give the size: TH3CL2M20N fits a 20 mm shaft, and TH3CL2M45N fits a 45 mm shaft.
You will find these units on chain conveyors, bucket elevators, belt conveyors and belt drives in food, cement, mining and logistics operations. Keeping constant tension in those drives is what stops chain jump and early wear. The mounting pattern also lets them go onto existing structures with little rework.
Shaft diameter, chain or belt pitch and the fastening style already on the machine are the three things to check before ordering. Match the seal to the site: a reinforced radial shaft seal where abrasive dust is present, a tighter seal in damp areas. At installation, line the bearing up with the chain run and keep enough adjustment travel for tensioning. Use a lubricant compatible with the bearing fitted in the unit and renew it according to the duty cycle.
Take-up bearings from Link-Belt can be swapped with other brands that share the same mounting standard and equivalent shaft diameters. Before you request a quote, compare center height, hole spacing and sealing type. Our team can point you to the option that fits your application and keeps the original equipment running. Specific variants are handled with the brand.
To get a quote, send the full part number by WhatsApp or email, for example TH3CL2M30N, or the shaft and fastening dimensions. With that information we reply promptly and suggest the alternative that suits your drive.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the THCL designation mean in Link-Belt bearings?
- THCL is the family of take-up bearings for shaft mounting. The letters that follow show the fastening and sealing type, and the digits give the shaft diameter. Every combination is a distinct variant for a given application.
- How do I choose the right take-up bearing for my chain?
- Start with the shaft diameter, the chain pitch and the space available for mounting. Those three values lead to the correct THCL part number. If the part number is not at hand, send the dimensions by WhatsApp and we will identify the compatible option.
- Are Link-Belt THCL bearings compatible with other brands?
- In most cases they interchange with other brands that use the same mounting dimensions and shaft diameters. When you ask for a quote, we check center height, hole spacing and sealing so the fit is confirmed.