LINK-BELT T3Y2E20N take-up bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT T3Y2E20N belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for T3Y2E20N and any equivalents.
A take-up bearing in the LINK-BELT 200 series keeps the correct tension on a chain drive. Mounted on the slack side, it rotates freely as the chain moves, compensates for small alignment errors and helps limit wear on both chain and sprockets. MR Industrial Accessories LLC supplies this line and can point you to suitable equivalents.
Reading the code is straightforward once you know the blocks. The first letter, T, marks a take-up bearing. The digit after it gives the shaft diameter. Y identifies the housing type, E refers to the sealing arrangement, and the closing N indicates the mounting variant. So T3Y2E20N describes a take-up unit for a 20 mm shaft with a Y housing and E sealing. Ordering by the full code avoids mistakes.
Typical installations include chain conveyors, bucket elevators, belt conveyors and drive systems in food processing, cement, mining and logistics operations. Wherever chain tension has to stay constant, these units help prevent skipping and breakage.
Selection comes down to three items: shaft diameter, chain pitch and housing type. The E sealing keeps dust and moisture out, which suits areas with airborne particles. At mounting, verify that the housing lines up with the chain and set tension per the equipment manual. Lubricating the bearing at regular intervals supports its service life.
LINK-BELT 200 series take-up bearings interchange with other brands that share the same mounting nomenclature. When replacing a component, compare the critical dimensions: shaft diameter, distance between mounting centers and overall height. Our team can help you identify a workable equivalent without modifying the equipment.
To get a quote, send the complete code by WhatsApp or email. If you do not have it, share the shaft dimensions and chain type and we will provide the reference you need.
Dimensions
- Bore
- 1 1/4 in
Frequently asked questions
- What does the designation T3Y2E20N mean?
- T is the take-up bearing, 3 the shaft diameter, Y the housing type, E the sealing and N the mounting variant. The final 20 is the 20 mm shaft diameter. That code lets us identify the exact part.
- Is this housing suitable for any chain?
- No. You need to check the chain pitch and the shaft diameter. The 200 series take-up bearing fits standard-pitch chains, but mounting dimensions must match. Send us your equipment data and we will confirm.
- How do I request an alternative if I cannot find the code?
- Message us on WhatsApp or email with the original code or the shaft and chain dimensions. We will give you a compatible reference from LINK-BELT or another brand we supply.