LINK-BELT SG222ELPA insert bearing

LINK-BELT SG222ELPA belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SG222ELPA and any equivalents.

The LINK-BELT SG200ELPA is a single-row ball insert bearing built with an extended inner ring, made to sit inside a split or pillow block housing. It suits equipment with a rotating shaft that needs straightforward alignment and locking, including conveyors, fans, mixers and farm machinery. Mounting is on a cylindrical shaft, held either by set screws or by a collar, depending on which variant you have. MR Industrial Accessories supplies this line to plants and workshops throughout the USA, Canada, Mexico and South America.

Read the code from left to right and it tells you most of what you need. SG marks the insert family with an extended inner ring locked by set screws. The three digits that follow, as in SG210ELPA, SG211ELPA or SG216ELPA, set both the bearing size and the shaft diameter it fits. ELPA covers how the seal and the lubrication are built, aimed at running continuously where dust or moderate humidity is present. Because every number and suffix combination is a distinct size, the complete code is what should go on a quote request.

Typical duty includes belt conveyors, bucket elevators, screens, mills, feed mixers and aggregate processing equipment. Seeders, harvesters, ventilation systems and pumps also use them. What makes the insert practical is the swap: free the shaft, pull the old bearing out and seat the new one, all without tearing down the whole housing. That is why maintenance planners lean on it when downtime has to stay short.

Selection comes down to shaft diameter, whether the load is radial, axial or combined, and the conditions on site. The seal decides how the insert copes with dust, water or frequent washdowns, while the grease base, lithium or synthetic, follows the working temperature. At mounting, confirm the housing is aligned and tighten the set screws onto the shaft without marking it. Poor alignment or too much axial play will cut bearing life, so follow the manufacturer's commissioning instructions.

Inserts from other makers can often be swapped in when the key dimensions line up: bore, outside diameter, width and fixing method. LINK-BELT is a well-known name in this family, and equivalents with matching dimensions can be sourced. The safe route when replacing one is to compare the full designation together with the housing dimensions. If anything is unclear, send the old code or the shaft and housing measurements and the MR Industrial Accessories team will point you to the compatible option.

To get a quote on a LINK-BELT SG200ELPA series insert bearing, message us on WhatsApp with the exact code, for instance SG210ELPA or SG215ELPA, plus the quantity. You will get the quote and the technical details you need without a long wait. We can also help if you want a different sealing or fixing arrangement. MR Industrial Accessories carries this line so your equipment stays in service.