LINK-BELT PT3CL227N flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT PT3CL227N belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PT3CL227N and any equivalents.
The Link-Belt 2-bolt flange bearing is a mounted unit that fastens to a flat surface using two bolts. It supports shafts in applications where the mounting must sit flush against a wall or structural panel. This design allows straightforward alignment and easy access for maintenance. MR Industrial Accessories supplies this line with technical guidance to select the correct size based on shaft diameter and operating conditions.
The part number breaks down into meaningful segments. PT denotes the flange housing style. The following number represents the nominal shaft diameter in inches. CL specifies the mounted bearing series, while N indicates the locking or sealing variant. The 200 series covers medium-duty sizes.
Typical applications include belt and screw conveyors, bucket elevators, mixers, blowers, centrifugal pumps, and process lines in food, chemical, and aggregate plants. The two-bolt flange design simplifies installation on steel structures or masonry walls.
When selecting a housing, begin with the shaft diameter and the type of load. Conveyors usually impose primarily radial loads, while screw flights and blowers may add some axial load. Verify that the flange has sufficient space for the bolts and that the mounting surface is flat and clean. During installation, align the shaft with the housing before tightening, lubricate according to the seal type, and check radial clearance. The spherical seat of the bearing can compensate for slight misalignment, but correcting it is recommended to avoid reducing service life.
Link-Belt housings are interchangeable with other brands of two-bolt flange mounted bearings that follow the same dimensional standard. The critical dimensions to compare are shaft diameter, hole spacing, bolt diameter, and center height. If the original code does not match, an equivalent from another brand can be used as long as those dimensions are maintained. MR Industrial Accessories can suggest a compatible alternative or, if needed, arrange for a custom-made part.
To request a quote for a flange housing, send the code or model via WhatsApp to MR Industrial Accessories. We will respond promptly and provide advice to ensure the part fits without rework. We can also review the complete assembly — bearing, housing, and seal — so that the replacement is correct.
Dimensions
- Bore
- 1 11/16 in
Frequently asked questions
- How do I choose the right flange housing for my shaft?
- Measure the shaft diameter and the distance between the flange holes. With that information and the equipment code, we will identify the corresponding model from the 200 series. If no code matches, we will find a compatible alternative.
- Can a housing from another brand replace a Link-Belt one?
- Yes, provided the shaft diameter, hole spacing, bolt diameter, and center height are the same. The series follows interchangeability standards, so an equivalent from another brand can generally be used.
- What maintenance does this type of housing require?
- Periodically inspect the seal and lubrication, and ensure the shaft does not have excessive radial play. In dusty or humid environments, select a more closed seal and lubricate as often as the equipment manufacturer recommends.