LINK-BELT PLB66136FR pillow block bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- PLB6600
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT PLB66136FR belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PLB66136FR and any equivalents.
LINK-BELT PLB FR series pillow blocks are foot-mounted units that hold the bearing and anchor it to the machine frame. They support rotating shafts in transmission equipment where stable alignment and straightforward assembly and maintenance are required.
The part number follows a clear pattern: PLB, then a four-digit number, then FR. PLB indicates the pillow block family, the number identifies the series and size within the PLB6600, 6800, 7800, 7600 and 7900 lines, and FR marks the construction variant. Examples include PLB6859FR, PLB6863FR, PLB6864FR, PLB6867FR, PLB6871FR, PLB6872FR, PLB6879FR and PLB6880FR. Always use the complete part number when requesting a quote.
These units are common in conveyors, elevators, mixers, pumps, fans and process lines where a shaft turns on fixed supports. They suit food, cement, mining, aggregate processing and chemical plants because they handle radial loads and allow bearing replacement without dismantling the entire machine.
Selection starts with shaft diameter and load type. Then check sealing, lubrication and the clearance of the housed bearing. During installation, set the base on a flat, rigid surface, align the shaft with the equipment and tighten the screws evenly to avoid distorting the housing. Good lubrication and sealing help extend service life and reduce unplanned downtime.
Interchangeability across brands depends on mounting geometry, shaft diameter and housed bearing type, not just the part number. An equivalent pillow block must match hole spacing, center height and fastening system. If the original part number is unavailable, send a photo and the main dimensions so we can identify a compatible alternative within the LINK-BELT line.
To replace a pillow block or set up a new line, send the complete part number by WhatsApp or email. With the model, shaft diameter and equipment reference, we will quote the part and suggest the best-fitting alternative. We can also review applications with specific load, environment or lubrication requirements.
Dimensions
- Bore
- 8 1/2 in
Frequently asked questions
- How do I identify the pillow block I need?
- Locate the part number on the part or equipment plate and compare it with the PLB series. If it is missing, measure the shaft diameter and the base hole spacing, then send that data via WhatsApp for guidance.
- What does the FR suffix mean in these pillow blocks?
- The FR suffix indicates a construction variant within the PLB family. To confirm it fits your equipment, compare the complete part number and mounting dimensions with the original part.
- Can I replace a pillow block from another brand with a LINK-BELT one?
- Yes, if shaft diameter, center height, hole spacing and housed bearing type match. Send measurements or a photo of the part and we will indicate the compatible alternative within the LINK-BELT line.