LINK-BELT PLB23064K111516 split plummer block housing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 23000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT PLB23064K111516 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PLB23064K111516 and any equivalents.
The LINK-BELT PLB series split housing is a mounting component that holds and secures a bearing in rotating equipment. Because it comes in two halves, the bearing can be fitted or swapped out without pulling the shaft or the drive apart, which keeps maintenance work simpler. You will find it on conveyors, mills, pumps and industrial fans, among other machines. MR Industrial Accessories supplies this line.
The PLB code is built from letters and numbers that point to the housing's size and layout. Part numbers such as PLB22648K81516 and PLB23044K8 show how the code packs the housing type, shaft size and outer diameter into one string. The digits at the end flag locking and sealing options. To pick the right one, give us the full part number from the nameplate or the equipment drawing.
These housings turn up in food processing, cement, mining and aggregate operations, where equipment runs under heavy loads and tough conditions. Common homes for them include belt conveyors, bucket elevators, mixers and mills. The split design pays off in hard-to-reach spots, cutting downtime when a bearing needs attention. MR Industrial Accessories carries them for both replacement and new projects.
When selecting a housing, check the shaft diameter, the bearing type it will hold and the working conditions: dust, moisture or temperature. The right sealing keeps contaminants out and helps the bearing last. At installation, make sure the halves line up and the bolts are tightened evenly. Use the lubricant specified for the bearing and the environment. If anything is unclear, send us the part number and we will point you to a compatible option.
LINK-BELT PLB series housings can be swapped with other brands that follow the same mounting standard, as long as the main dimensions and bearing type line up. A similar part number is not enough: compare shaft diameter, bolt spacing and center height. If you are replacing a housing from another brand, send us the dimensions or the part number and we will quote the equivalent.
To request a quote for your LINK-BELT PLB series split housing, message us on WhatsApp with the complete part number or the shaft and bearing dimensions. We reply promptly with the alternatives that fit your equipment. We also build custom split housings for special configurations. MR Industrial Accessories serves customers across the United States and in several Latin American countries.
Dimensions
- Número de producto
- 23064
- Bore
- 11 15/16 in
Frequently asked questions
- How do I identify the housing I need?
- Check the part number stamped on the housing or on the equipment nameplate. If it is not there, measure the shaft diameter, the distance between the mounting holes and the center height. With those figures we will quote the equivalent model.
- What is the difference between a split housing and a solid one?
- A split housing opens into two halves, so it can be mounted or removed without taking the shaft or the drive apart. A solid one requires sliding the bearing from the end of the shaft. The split housing makes maintenance easier on hard-to-reach equipment.
- Are LINK-BELT PLB series housings interchangeable with other brands?
- They can be if the critical dimensions match: shaft diameter, bolt spacing and center height. A similar part number is not enough. Send us the dimensions or the part number and we will indicate the compatible alternative.