LINK-BELT PKLB66M260FR split plummer block housing

LINK-BELT PKLB66M260FR belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PKLB66M260FR and any equivalents.

Split plummer block housings in the LINK-BELT PKLB line allow the bearing to be installed or pulled without taking the shaft or drive apart. They support rotating shafts in equipment that is serviced in place, and they show up in conveyors, mills, pumps and process machines. MR Industrial Accessories supplies this line and helps you match the housing to your shaft diameter and mounting arrangement.

Reading the code is straightforward once you know the blocks. PKLB marks the LINK-BELT split plummer block family. The two digits that follow give the housing series, either 6600 or 6800. The number after the M is the shaft diameter the housing is machined for. The FR ending identifies the mounting or sealing variant. That means PKLB66M220FR and PKLB68M65FR come from different series and are picked by shaft size and mounting type.

You will find these housings on belt and chain conveyors, bucket elevators, mixers, mills, centrifugal pumps and continuous process lines. Splitting into two halves makes bearing replacement easier on lines where a stop means lost output. They also suit low- and medium-speed drive shafts, where alignment and solid support affect how long the assembly lasts.

Selection starts with the shaft diameter and the bearing you plan to house. Confirm the mounting type the equipment calls for: a lock ring, set screws or an adapter sleeve. Look at sealing as well; dusty, wet or washdown conditions call for extra protection. When mounting, line up the two halves and tighten the bolts evenly. Correct lubrication and periodic re-tightening help the bearing last.

LINK-BELT housings can replace other brands of standard split plummer block housings when the series, shaft diameter and mounting type line up. Matching the bearing alone is not enough: compare center height, hole spacing and sealing system. If you have the original part number, we can identify a compatible alternative. Without it, the shaft size and a photo of the mounting are enough for us to guide you.

For a split plummer block housing on your equipment, send the part number from the part or drawing via WhatsApp. MR Industrial Accessories quotes the LINK-BELT reference or the alternative that fits your application. We support workshops, plants and maintenance teams with technical advice and a fast response.