LINK-BELT PEU315 pillow block bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 300
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT PEU315 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PEU315 and any equivalents.
The LINK-BELT PEU Series 300 is a split pillow block housing with an inserted bearing, built to hold and align rotating shafts in power transmission equipment. It fits applications where the shaft needs firm support and the mounting has to be straightforward and adjustable. We supply this line and help you match the housing to your shaft and working conditions.
In the PEU code, the letters point to the split pillow block family. The number after them, as in PEU314 or PEU320, sets the bearing and shaft size: larger numbers mean a bigger shaft diameter and higher load capacity. Series 300 covers the medium-section sizes, which handle moderate to high loads. Suffixes can signal differences in sealing, locking method, or housing material, so include the full part number when you ask for a quote.
Typical installations include belt conveyors, bucket elevators, mills, mixers, pumps, and industrial fans. In agro-industrial plants they show up on screw conveyors and norias; in food processing, on process equipment; and in metallurgical operations, on rolling and wire drawing lines. The pillow block layout makes mounting on baseplates or steel structures easy, and it allows axial adjustment and alignment during installation.
When selecting a housing, look at shaft diameter, radial and axial load, and the environment. The seal has to keep out dust, water, or particles as the site demands. Internal clearance and lubrication affect service life: follow the manufacturer's recommendations for grease type and relubrication frequency. Alignment between housings is critical to avoid extra stresses. An inserted bearing provides some compensation, but check leveling after mounting.
LINK-BELT Series 300 housings are interchangeable with other brands that follow the same pillow block mounting nomenclature and standardized diameters. For a quote, send the complete part number and shaft dimensions; we can offer a compatible alternative or in-house manufacturing if a special configuration is needed. The housing and bearing must respect tolerances for a correct fit.
To get a quote, send the housing part number (for example, PEU315) and your working conditions via WhatsApp. We reply promptly with technical and commercial information. We can also advise on lubrication and mounting so commissioning goes smoothly.
Dimensions
- Bore
- 15/16 in
Frequently asked questions
- What does PEU mean in LINK-BELT housings?
- PEU identifies pillow block housings with a split housing and inserted bearing. The number that follows indicates the shaft size. Series 300 covers medium-section sizes for moderate to high loads in industrial applications.
- How do I choose the right PEU housing for my shaft?
- You need the shaft diameter, radial and axial load, and environmental conditions. With that data we can point you to the exact part number. If you do not see the size you need, message us on WhatsApp with the model and we will quote a compatible option.
- Are PEU housings interchangeable with other brands?
- In general, yes—they interchange with other brands that use the same pillow block mounting nomenclature and standardized diameters. Always check tolerances and seal type. We can help you choose the correct alternative.