LINK-BELT PEB224M75H pillow block bearing

LINK-BELT PEB224M75H belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PEB224M75H and any equivalents.

LINK-BELT PEB B22400 series pillow block bearings are split-housing mounted units with an inserted bearing, designed to support drive shafts in industrial machinery. The part number PEB…M…H tells you the size and shaft diameter: for instance, PEB224M25H is a B22400 unit for a 25 mm shaft. These units bolt onto beds or structures, making shaft alignment and securing straightforward.

Break the designation into blocks to read it: PEB stands for the pillow block type, 224 points to the B22400 series, M means metric, and the number after M is the shaft diameter in millimeters. The trailing H indicates the housing style. So every part number in this series shares the same series code but differs in shaft size. Provide the complete part number and we can quote the exact variant you need.

In US industry, these bearing units show up on belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, and chain or belt drive lines. They suit applications where the shaft needs sturdy, removable support and where you want to replace the bearing without tearing down the whole assembly. You will find them in food, cement, and chemical plants, as well as in material handling equipment.

When selecting a unit, look at shaft diameter, radial and axial loads, and the sealing needed for the environment. In dusty or wet areas, pay attention to the insert protection and lubrication. For installation, the base must be flat and rigid, supports must be aligned, and bolts should be tightened evenly. Before start-up, verify clearance and lubrication.

Mounted bearings in the B22400 series can be swapped between brands according to each maker's standard, but matching shaft diameter alone is not enough: bolt hole spacing, center height, and mounting type must also line up. We can point you to a compatible alternative. Send the part number or measurements via WhatsApp or email and we will take it from there.