LINK-BELT P3S2E36E flange bearing 3 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT P3S2E36E belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P3S2E36E and any equivalents.
This LINK-BELT mounted unit pairs a cast iron flange housing with a self-aligning insert bearing. It supports rotating shafts on machine sides, chassis or frames where a flat mounting base is not practical. Three bolts secure the flange, while the insert grips the shaft, making installation and replacement straightforward.
The part number follows a logical pattern: the letter P denotes a flange bracket, the first digit gives the housing size, S identifies the insert style, and the remaining digits specify the nominal shaft diameter and sealing options. Reading the code this way lets you order the exact reference without confusion.
Typical applications include conveyors, bucket elevators, mixers, material handling systems and process machinery. In food processing, cement, quarrying and agricultural operations, these brackets handle dust, moisture and frequent washdowns. When a shaft runs parallel to a wall or panel, the 3-bolt flange provides reliable support, and the self-aligning insert compensates for minor installation misalignment.
Selection depends on shaft diameter, locking method and sealing requirements. For fine dust or liquid exposure, choose an insert with enhanced sealing. During installation, place the flange on a clean, flat surface, tighten the three bolts in a cross pattern, and verify the shaft turns freely. Lubricate through the built-in grease fitting with the equipment stopped, avoiding over-greasing.
Flange brackets with insert bearings are interchangeable across brands when shaft diameter, bolt hole spacing and locking type align. LINK-BELT is a brand we supply, and many references from other manufacturers follow the same mounting standard. If you cannot find your part number, send the shaft and flange dimensions and we will identify a compatible alternative or quote a custom solution.
To request a quote, message us on WhatsApp with the complete part number or the shaft and flange dimensions. We respond promptly with the reference you need and can advise on sealing and lubrication for your plant's conditions.
Dimensions
- Bore
- 2 1/4 in
Frequently asked questions
- How do I order the correct flange bracket for my shaft?
- Provide the complete part number from the nameplate or drawing. If unavailable, send the shaft diameter and the distance between flange holes. With that information, we will quote the exact reference.
- What distinguishes the part numbers in this series?
- They share the same flange housing, but the shaft diameter they accept varies. The number after the S indicates the insert size. Therefore, the complete part number is essential to ensure proper shaft fit.
- Can these brackets be used in dusty or washdown environments?
- Yes, with appropriate sealing. For fine dust or liquids, select an insert with enhanced protection and follow a regular lubrication schedule. Tell us about your operating environment and we will recommend the best variant.