LINK-BELT MFXS227N flange bearing 2 holes

LINK-BELT MFXS227N belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MFXS227N and any equivalents.

The LINK-BELT 200 series 2-bolt flange mounted bearing is a pre-assembled unit that pairs an insert bearing with a flange housing. Two bolts secure it, making it suitable for supporting rotating shafts where a compact front mount is needed.

Part numbers in this line start with MFXS, followed by a three-digit number and the letter N. The middle digits indicate the insert size within the 200 series: for example, MFXS216N and MFXS232N show that a higher number corresponds to a larger shaft diameter. The final N denotes the standard mounting configuration. This coding lets you identify housing type, series and shaft size from a single reference.

Typical applications include conveyors, elevators, mixers, blowers and process lines in food, chemical and materials plants. The two-bolt front mounting simplifies fastening to sheet metal or structural frames, while the flange housing helps align the shaft and accommodates combined loads in tight spaces.

When selecting a part number, begin with the required shaft diameter and the load type: radial, axial or combined. Verify the hole spacing and hole diameter to match your existing structure. The insert is usually supplied lubricated and with seals that retain grease and exclude dust; in humid or particle-heavy environments, review the sealing option. Proper installation calls for flat, clean supports, even bolt tightening and alignment checks to prevent stress on the bearing.

LINK-BELT designations cross-reference with other brands that follow the same series and shaft size logic. For a quote, provide the complete part number, such as MFXS219N, along with the main equipment dimensions. Our team can suggest an equivalent from the brands we supply and help if you are replacing an existing mounting.

If you are unsure which part number fits, send the old bearing model, a photo of the housing, or the shaft and hole dimensions via WhatsApp or email. We will quote the corresponding LINK-BELT reference and assist with selection. Custom housing manufacturing can also be evaluated if the standard mount does not suit your machine.