LINK-BELT MFCS219 flange bearing 4 holes

LINK-BELT MFCS219 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MFCS219 and any equivalents.

The LINK-BELT MFCS is a 4-bolt flange housing from the 200 series. It holds a rotating shaft perpendicular to a wall, frame or metal structure, and it handles moderate radial and axial loads together. MR Industrial Accessories supplies this line and helps you pick the right configuration based on shaft diameter and how the equipment runs.

Read the code first. MFCS tells you it is a 4-bolt flange housing with a mounted bearing; the digits after it give the shaft size from the 200 series table. So MFCS219 is one specific shaft diameter in that family. The series uses a medium duty section and covers a wide range of diameters, which makes the suffix the fastest way to find the nominal shaft size and the mounting dimensions that go with it.

You will see these units on belt conveyors, bucket elevators, mixers, mills, conveyor belts and process equipment in food, chemical, cement and aggregate plants. Flange mounting keeps installation simple on hopper walls or frames. Four bolts give a firm hold and accurate shaft alignment, so the housing stands up to vibration and to the combined loads found on equipment that runs continuously.

Selection comes down to shaft diameter, load type (radial, axial or both) and the working environment. Confirm the flange matches your structure and that the holes line up. Lubrication and sealing against dust and moisture both affect how long the housing lasts. When mounting, keep the shaft perpendicular to the flange and tighten the bolts evenly so the housing does not distort. If the equipment runs with misalignment, look at housings with suitable internal radial clearance.

For equivalents, 200 series flange housings can be swapped between brands that share the same mounting standard and dimensions. LINK-BELT is a known reference, and compatible options are available. Compare shaft diameter, hole spacing on the flange, outer diameter and seal type before deciding. MR Industrial Accessories can point you to the compatible alternative that matches your equipment dimensions.

If you need an MFCS flange housing, send the complete part number or the shaft and flange dimensions on WhatsApp. We will quote it and advise you so the part fits your application. We also manufacture split plummer block housings and other custom parts for specific needs.