LINK-BELT MFCCL223N piloted flange bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT MFCCL223N belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MFCCL223N and any equivalents.
A piloted flange bearing housing from the LINK-BELT 200 series bolts straight onto the frame of your machine, so no separate housing has to be bored or fitted. The circular flange locates the bearing against a flat mounting face, which suits equipment where room around the shaft is tight and the bearing has to sit square to the load. MR Industrial Accessories LLC supplies this line and helps you match the right variant to the shaft and the mounting pattern you already have.
Reading the code is the fastest way to order. MFCCL is the prefix for this piloted flange design, and the digits that follow it — 219, 223, 224, 227, 228, 231, 232, 235 — are insert bearing sizes, each tied to a particular shaft diameter. The trailing letter N marks one sealing and locking arrangement inside the line. Give the full reference when you ask for a quote, for instance MFCCL219N or MFCCL228N, and the size is settled.
Typical duty covers belt conveyors, bucket elevators, mixers, agitators, pumps and industrial fans. Plants handling food, cement, mining and aggregates rely on this flange style because it mounts directly to a chassis or frame and keeps the assembly compact. The 200 series handles general-purpose shafts, and the bolt-on layout makes changeouts straightforward on equipment running at moderate loads.
Two things drive selection: the shaft diameter and the mounting your equipment accepts. Because the pilot centers the insert in the housing, the mounting surface needs to be clean and flat. The insert seal keeps dust and moisture out, and in dirty or wet areas a version with an extra seal is worth considering. Correct lubrication and careful alignment both matter for how long the assembly lasts.
LINK-BELT mounted bearings are well known in the field, and 200 series flange housings frequently share dimensions with other brands using the same nomenclature. On a replacement job, compare shaft diameter, bolt spacing and sealing before committing. MR Industrial Accessories LLC can point you to a compatible equivalent that keeps the machine running as intended.
Send the MFCCL code and size number over WhatsApp or email and we will quote the exact reference or suggest the closest alternative for your machine. We also manufacture split plummer block housings to round out an order.
Dimensions
- Bore
- 1 7/16 in
Frequently asked questions
- How do I work out which MFCCL size I need?
- The digits after MFCCL refer to the insert bearing size, which sets the shaft diameter. MFCCL219N, for example, fits a 1 3/16 inch shaft. Measure your shaft and the flange bolt spacing before you request a quote.
- What does the N at the end of the code indicate?
- The N denotes a construction variant in the series, usually linked to the sealing method or the way the insert locks to the shaft. Send us the full code and we will confirm the configuration that fits your application.
- Can this housing replace another brand's unit?
- Dimensions are often shared between brands in the 200 series piloted flange family. Check shaft diameter, bolt spacing and sealing for a safe swap, and we will help you identify the right equivalent.