LINK-BELT FX3S2B08E flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FX3S2B08E belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FX3S2B08E and any equivalents.
A 2-bolt flange bracket from the Link-Belt series 200 is a mounted bearing designed to be bolted to a flat surface. It suits arrangements where the shaft runs at a right angle to the mounting plane and the applied load is mainly radial. MR Industrial Accessories LLC supplies this line for power transmission and conveying applications.
The part number is built in blocks. The prefix FX identifies the flange bracket type, the letter S refers to the mounting, and the letter B points to the shaft diameter. Take FX3S2B08E as an example: the digit ahead of the S gives the housing size, the one after the B gives the shaft size, and the trailing E marks a sealing variant. Every size in series 200 can be pinned down this way.
Typical installations include belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. These brackets are common where a drive shaft is anchored to a side structure and a rigid support that is simple to swap out is required. Bolting through two holes keeps mounting straightforward on folded sheet metal or steel profiles.
Selection starts with the shaft diameter and the load pattern: mostly radial, with a degree of axial depending on the bearing inside. Before the bolts are tightened, check that the flange sits square to the shaft, since a flange pulled out of line speeds up seal wear. Grease is introduced through the housing channel; match the lubricant to the operating temperature and avoid mixing greases with different bases.
On interchangeability, series 200 2-bolt flange brackets from different makers line up by shaft diameter and hole spacing, while the sealing arrangement, the inner ring locking method and the housing itself can differ. Compare those three points before substituting one make for another. Where mounting space is limited, the overall height of the bracket also decides whether it will fit.
Send the complete part number by WhatsApp or email and MR Industrial Accessories LLC will quote it. If you need a sealing variant or another shaft diameter within series 200, share the model and we will point you to the compatible option. Our team can also suggest equivalents and help with selection. Split plummer block housings built to order are available for non-standard equipment.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- How do I identify the bracket I need?
- Send the full part number, for example FX3S2B08E. It shows the flange type, housing size, shaft diameter and sealing variant. With that we quote the exact reference or a compatible equivalent.
- Can it be replaced by another brand?
- Yes, if the shaft diameter, hole spacing and mounting height match. Sealing and the inner ring locking system may differ between manufacturers, so compare those points before installing.
- What lubrication does this bracket take?
- General-purpose bearing grease, applied through the housing channel. Follow the working temperature of the equipment and do not mix greases with different bases. In wet or dusty environments, choose a reinforced sealing variant.