LINK-BELT FX3CL210N flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- CL
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FX3CL210N belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FX3CL210N and any equivalents.
A LINK-BELT 200 series 2-bolt flange bearing mounts directly onto a flat surface with two bolts, supporting shafts where the housing must sit flush against the structure. MR Industrial Accessories LLC supplies this line and quotes the exact part number you request by WhatsApp or email.
The part number begins with FX, then a digit for the shaft size, such as FX3CL210N, FX3CL211N or FX3CL212N. CL denotes the 2-bolt flange series, and the trailing N indicates the locking method. Additional symbols may appear to specify sealing or housing options. Provide the complete code and we will quote that reference.
You will find these bearings on belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate operations. They suit horizontal shafts supported on steel frameworks, and the two-bolt flange makes installation easier where a foot-mounted base will not fit.
When selecting, confirm the shaft diameter and the flange bolt hole spacing. Sealing matters in dusty or damp conditions, where a reinforced seal variant is recommended. During installation, place the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify shaft alignment. Initial lubrication from the factory covers start-up; thereafter follow your equipment maintenance schedule.
200 series flange bearings interchange between brands by shaft number and flange configuration. LINK-BELT, Rexnord and other lines use similar designations, but suffixes and seals differ. If you have the old part number, send it and we will identify a compatible alternative or quote a custom version if required.
MR Industrial Accessories LLC supplies LINK-BELT. Send the part number from your equipment by WhatsApp and we will quote it promptly.
Dimensions
- Bore
- 5/8 in
Frequently asked questions
- How do I identify the flange bearing I need?
- Check the part number on the bearing or measure the shaft diameter and the bolt hole spacing. With that information we will quote the corresponding LINK-BELT 200 series reference.
- What does CL mean in the designation?
- CL identifies the 2-bolt flange series in the LINK-BELT line. The following number indicates shaft diameter, and the final N indicates the locking type.
- Can another brand replace it?
- Yes, 200 series flange bearings interchange between brands by shaft number and configuration. Send us the original part number and we will suggest a compatible alternative.