LINK-BELT FCEU3K27 flange bearing 4 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 300
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FCEU3K27 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FCEU3K27 and any equivalents.
When a shaft needs support on a flat wall or plate, a 4-bolt flange housing keeps the assembly compact and the shaft perpendicular to the mounting face. The Link-Belt 300 series covers this need with a self-aligning insert that is straightforward to replace. MR Industrial Accessories supplies this line to maintenance and purchasing teams across the United States and Latin America.
The code tells you what you are holding. FCEU marks the 4-bolt flange family. The number after the letters points to the housing series, and the last number gives the shaft diameter the insert is bored for. The K in the middle identifies how the inner ring locks onto the shaft. So FCEU3K27, FCEU3K31, FCEU3K35, FCEU3K39, FCEU3K47 and FCEU3K55 are the same flange unit with different shaft bores.
You will find these housings on belt and chain conveyors, bucket elevators, mixers, screens, plant fans, centrifugal pumps and process equipment in food, chemical, cement and aggregate operations. Wall mounting simplifies the structure and leaves the side of the machine clear, which is why they show up on material handling systems and processing lines where space around the shaft is tight.
Selection comes down to three things: shaft diameter, locking type and sealing. The environment decides the seal—dust, wash water or pressure washing each call for a different level of protection. During installation, set the flange on a flat, clean surface, tighten the four bolts in a cross pattern and confirm the shaft turns freely. The insert self-aligns to absorb small deviations, but that does not replace proper initial alignment or correct lubrication.
Flange units interchange by shaft number, hole count, center distance and insert type, not by the full code. A flange from one brand often matches another, with only the locking system or seal differing. If you are replacing an existing unit, send the code stamped on the housing or the flange dimensions. Write to us on WhatsApp or email with that information and our team will reply promptly with a quote, suggest equivalents and help you choose.
Dimensions
- Bore
- 1 11/16 in
Frequently asked questions
- What does the Link-Belt FCEU3K designation mean?
- FCEU indicates a 4-bolt flange. The number that follows is the housing series, and the K refers to the locking method of the insert on the shaft. The final number is the shaft diameter, so FCEU3K27 and FCEU3K55 share a flange but not a shaft.
- How do I identify the flange size I need for a replacement?
- Note the shaft diameter, the center distance between holes, the flange outer diameter and the number of holes. With those dimensions we can identify the equivalent unit. If the code is stamped on the housing, send it to us directly on WhatsApp.
- Can the housing be mounted in any position?
- Yes. The 4-bolt flange allows vertical, horizontal or inclined mounting on a flat face. The self-aligning insert handles small angular deviations, but check bolt tightening and lubrication before starting the equipment.