LINK-BELT FCEA339 flange bearing 4 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 300
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FCEA339 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FCEA339 and any equivalents.
The LINK-BELT FCEA series covers 4-bolt flange mounted bearings, factory-assembled units that pair an insert bearing with a flange housing. The housing bolts to a flat surface while the shaft passes through at a right angle, giving stable support for rotating shafts in power transmission drives.
Reading the code is straightforward: FCEA marks the 4-bolt flange family, and the digits that follow, such as FCEA323, FCEA327 or FCEA335, tie the unit to a particular insert bearing size and load capacity. The 300 series covers the medium-section sizes in the LINK-BELT range. For an accurate quote, send the full part number so the exact unit or a suitable equivalent can be identified.
Typical installations include conveyors, elevators, mixers, mills, pumps, fans and process equipment across food, chemical, cement and material handling operations. The four-bolt flange holds firmly to steel structures or masonry, which simplifies both initial mounting and replacement in the field.
Selection depends on shaft diameter, radial and axial load, and the operating environment. Confirm the seal arrangement, since standard units generally use lip or contact seals to keep lubricant in and dust out. Internal clearance and lubricant choice should match the running speed.
When mounting, align the flange with the shaft and tighten the bolts in a cross pattern to prevent distortion. LINK-BELT bearings are interchangeable with other brands that share the same mounting dimensions. To replace an existing unit, compare shaft diameter, flange hole spacing and overall height, and the matching alternative can be confirmed from those figures.
Send the complete part number, for example FCEA339 or FCEA347, or the measurements of the unit being replaced, by WhatsApp or email. The team replies promptly and can suggest equivalents and help with selection.
Dimensions
- Bore
- 2 7/16 in
Frequently asked questions
- What does the FCEA designation mean on LINK-BELT units?
- FCEA identifies the 4-bolt flange family. The following digits indicate the insert bearing size and load capacity, and the 300 series groups the medium-section sizes in the LINK-BELT catalog.
- How can I check whether a flange unit fits my equipment?
- Compare the shaft diameter, the distance between the flange holes and the overall height of the unit. With those figures, the equivalent LINK-BELT unit for the application can be identified.
- What matters for mounting and lubrication?
- Align the flange and shaft, then tighten the bolts in a cross pattern. Use lubricant suited to the operating speed and temperature, and inspect the seals to keep contaminants out.