LINK-BELT FCB22456H flange bearing 4 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- B22400
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FCB22456H belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FCB22456H and any equivalents.
The Link-Belt 4-bolt flange bracket is a mounted bearing unit that pairs an insert bearing with a square or round flange housing. Four bolts fasten it to a flat surface, positioning the shaft perpendicular to that surface. It supports shafts in equipment where alignment and sealing matter, including conveyors, mixers and fans.
The code tells you what you are holding. In FCB22416H, FCB22419H and FCB22420H, the letters FCB mark a 4-bolt flange, the block 224 points to the B22400 bearing series, and the trailing digits give the shaft diameter. The H suffix describes the housing configuration. The B22600 series follows the same pattern with a different numeric block, so the full code leads you to the exact size.
You will find these brackets on belt conveyors, bucket elevators, mixers, dryers, fans and process equipment in food, chemical and materials plants. The 4-bolt flange mounts on walls or metal structures, and the housing carries the radial and axial loads of the insert bearing.
Selection starts with shaft diameter and bearing series. Sealing deserves equal attention: Link-Belt inserts typically use contact seals that hold grease in and keep contaminants out. Set the flange flat and tighten the four bolts evenly so the housing does not distort. Match the lubricant to load and speed, and specify reinforced seals for damp or dusty locations. Aligning the shaft with the flange avoids parasitic stresses.
Flange brackets from different brands can interchange when flange dimensions, shaft diameter and insert type match. Link-Belt, Rexnord and other brands offer equivalent configurations, but hole dimensions and centering diameter may differ. Compare dimensional drawings before replacing a unit.
Send the complete code by WhatsApp or email and the team replies promptly with a quote, suggests an equivalent when needed, and helps you choose the right bracket. Split plummer block housings, roller chains and sheaves are manufactured in-house.
Dimensions
- Bore
- 3 1/2 in
Frequently asked questions
- How do I identify the flange bracket I need?
- Use the complete code, such as FCB22416H, which shows the series and shaft diameter. You can also measure the shaft diameter and the distance between flange holes. With that data the team can quote the exact reference.
- Are Link-Belt brackets compatible with other brands?
- They are interchangeable when flange dimensions, shaft diameter and insert type match. Compare dimensional drawings before replacing. MR can suggest an alternative that fits your equipment.
- What lubrication and maintenance do they require?
- Use the grease recommended for the equipment's load and speed. Check the sealing and relubricate according to the environment. In moisture or dust, choose reinforced seals. Aligned mounting and evenly tightened bolts help extend service life.