LINK-BELT FC3Y238N flange bearing 3 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT FC3Y238N belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FC3Y238N and any equivalents.
The Link-Belt series 200 3-bolt flange bracket is a mounted bearing designed to be secured to a flat surface with three bolts. It fits layouts that call for a compact, rigid flange, with the shaft passing through or ending at the unit, where a pillow block is not suitable. MR Industrial Accessories supplies this line and assists in selecting the correct variant based on shaft diameter and mounting configuration.
The code breaks down into distinct elements: FC denotes the three-bolt flange, the following digit (3) specifies the housing type, Y identifies the mounted bearing series, and the three-digit number gives the shaft diameter within the 200 series. The trailing letter N indicates how the inner ring locks onto the shaft. All codes in this line share the flange format, with the shaft diameter being the variable.
Typical applications include belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, and process equipment in food, chemical, and aggregate plants. These brackets are chosen when a quick-mount flange and a self-aligning bearing are needed to accommodate slight frame misalignments.
Selection starts with shaft diameter and load type: primarily radial in conveying, with a moderate axial component. Confirm the number of holes and their spacing against the equipment flange. Sealing is critical in dusty or wet environments; choose the appropriate protection and relubricate according to the duty cycle. During installation, place the flange on a clean, flat surface, tighten bolts in a cross pattern, and verify the shaft turns freely.
Mounted flange brackets interchange between brands by shaft number, hole count, and flange dimensions, but center heights and fixing diameters can differ. Matching shaft diameter alone is not sufficient; compare the flange drawing and inner ring fixing method. A compatible alternative with the same mounting dimensions can be offered.
MR Industrial Accessories supplies the Link-Belt line and manufactures split plummer block housings, roller chains, and sheaves. For a 3-bolt flange bracket, send the code or model via WhatsApp or email for a prompt quote. We will also suggest a compatible alternative if you need a variant not listed.
Dimensions
- Bore
- 2 3/8 in
Frequently asked questions
- How do I identify the flange bracket I need?
- Provide the shaft diameter, the number of holes in the flange, and the complete code from the equipment. With that, we will quote the corresponding Link-Belt variant. If the code is unavailable, send a photo or the flange drawing via WhatsApp.
- What does the N at the end of the code mean?
- The final letter N indicates the type of fixing of the inner ring on the shaft. It is part of the mounted bracket designation and defines how the bearing locks to the shaft. Include the complete code when requesting a quote to ensure the exact variant.
- Can it be replaced by another brand?
- Yes, 3-bolt flange brackets interchange between brands if the shaft diameter, number of holes, and flange dimensions match. Center heights can vary, so compare the mounting drawing. Send us the dimensions and we will indicate a compatible alternative.