LINK-BELT FC3S2M35E piloted flange bearing

LINK-BELT FC3S2M35E belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FC3S2M35E and any equivalents.

A piloted flange unit from the LINK-BELT FC 200 line mounts a rotating shaft straight onto a machined surface. The pilot centers the assembly in the housing, while the fixing screws hold it rigidly in place. This makes the unit suitable where the shaft runs perpendicular to the mounting face and must stay aligned while carrying combined loads.

The part number breaks into blocks. FC stands for the four-bolt piloted flange. The first digit after FC gives the series size, here 200. The S that follows identifies the sealing type, M indicates how the inner ring is secured to the shaft, and the closing E marks the mounting variant. In FC3S2M35E and FC3S2M40E, the shaft diameter is 35 mm and 40 mm respectively. Reading the code this way removes guesswork when specifying a replacement.

Typical installations include belt conveyors, bucket elevators, mixers, mills and process equipment, as well as food machinery, water treatment plants and ventilation systems. The piloted flange suits setups where the unit bolts to a sheet or a machined crankcase and the shaft needs precise centering without a separate housing.

Selection depends on shaft diameter, load type (radial, axial or combined) and operating environment. The S seal keeps out dust and moisture; in equipment that is washed frequently, check the protection level. The support face must be clean and flat, and screws should be tightened in a cross pattern to avoid distorting the flange. Proper lubrication and correct internal clearance help the bearing reach its expected service life.

LINK-BELT FC 200 units interchange with other brands that follow the same piloted flange standard and matching shaft diameters. When requesting a quote, compare hole spacing and pilot diameter along with the shaft size and fixing method. MR Industrial Accessories supplies this line and can point you to a compatible alternative for an existing machine.

Send the unit code by WhatsApp or email to MR Industrial Accessories. The team replies promptly with a quote and, if you need a specific variant, will recommend the option that fits your application. They can also advise on mounting and lubrication so the assembly runs under optimal conditions.