LINK-BELT FBB22424H flange bearing 3 holes

LINK-BELT FBB22424H belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FBB22424H and any equivalents.

When a shaft needs to be supported on a flat face, the LINK-BELT 3-bolt flange bracket provides the cast iron housing that bolts to the structure and accepts a mounted bearing. The bearing sits perpendicular to the mounting surface, and the three bolts are accessible from the front. This arrangement is common in equipment where a flanged support is preferred over a traditional pillow block.

The code tells you what the bracket holds. In a reference like FBB22423H, the FBB prefix identifies the 3-bolt flange bracket family. The middle digits, 22423, correspond to the B22400 mounted bearing series and size. The trailing H marks the housing variant. The same logic applies to FBB22424H, FBB22431H, FBB22432H, FBB22623H and FBB22631H. For a quote, send the full code from the housing or the bearing model.

These brackets are used on belt and screw conveyors, bucket elevators, mixers, blowers, centrifugal pumps and process lines. They appear in food processing, cement, mining, aggregate and effluent treatment plants. The flange mounts directly to the structure, so the shaft runs perpendicular to the face and no additional tensioner is needed.

Selection depends on the mounted bearing diameter and type, the sealing required for dust, water or washdown, the lubrication method and the available mounting clearance. The 3-bolt flange must sit flat against the support face. Use shims where necessary and tighten the bolts evenly to avoid distorting the housing. Proper alignment and periodic re-tightening help the assembly last.

Interchangeability is based on the mounted bearing series and the flange dimensions. Casting details, sealing arrangements and hole positions can differ between manufacturers, so a replacement is confirmed by comparing the code and the critical dimensions. A photo of the flange and the bearing helps identify a compatible alternative.

MR Industrial Accessories supplies the LINK-BELT line and can quote the bracket you need. Send the FBB code shown on the equipment, or the mounted bearing model, through WhatsApp or email. If you need a variant not listed, include the code or model and the team will reply promptly with the corresponding reference or a suggested equivalent.