LINK-BELT F3W222E flange bearing 3 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT F3W222E belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F3W222E and any equivalents.
The LINK-BELT F…W…E is a three-bolt flange housing that supports a shaft and bolts directly to a wall or frame. It belongs to the 200 series and suits equipment where the mounting surface is flat and access is tight. MR Industrial Accessories supplies this line and helps you match the housing to your shaft and load.
The part number breaks down into four parts. The F stands for flange housing. The number that follows is the 200 series size. The W shows how the housing is mounted. The final E marks a construction variant. This is why F3W210E, F3W212E and F3W220E sit in the same family but take different shaft diameters. A complete part number leaves no room for confusion.
You will find these housings on conveyors, elevators, mixers, pumps, fans and process lines in food, chemical and materials plants. They work well on horizontal shafts under moderate load, where the housing must be firmly attached to a wall or frame. The three-bolt flange lets you mount on flat surfaces even when space around the shaft is limited.
When selecting a housing, start with the shaft diameter and the load type. Sealing matters too: pick the variant that fits the environment, especially where dust or moisture is present. During mounting, keep the flange flat against the surface and tighten the bolts evenly. Use the lubricant specified for the inner bearing, and check alignment to prevent side loads.
Series 200 flange housings are often dimensionally interchangeable between brands that follow the same nomenclature. If you are replacing an existing unit, compare the shaft diameter, the distance between bolt holes and the mounting style. MR Industrial Accessories can point you to a compatible option from the brands it carries, so the machine does not need modification.
To request a quote for the LINK-BELT F…W…E housing, send the full part number by WhatsApp or email. If you do not have it, share the shaft diameter and a photo of the mounting, and we will get back to you with the right reference. We can also help if you need a different sealing or mounting configuration.
Dimensions
- Bore
- 1 3/8 in
Frequently asked questions
- What does the F…W…E designation mean?
- F is the flange housing. The number is the 200 series size. W is the mounting configuration. E is a housing variant. Each complete part number corresponds to a different shaft size in the same family.
- How do I choose the housing for my equipment?
- You need the shaft diameter and the load type. The environment also matters: if dust or moisture is present, a variant with better sealing is advisable. With that data we can indicate the exact reference.
- Are they interchangeable with other brands?
- Series 200 flange housings usually share dimensions between manufacturers. To replace an existing one, compare shaft diameter, distance between bolt holes and fastening. MR can advise you so the substitution is direct.