LINK-BELT F3S2M25E flange bearing 3 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT F3S2M25E belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F3S2M25E and any equivalents.
When a rotating shaft needs firm support and a pillow block won't fit, a Link-Belt 200 series 3-bolt flange unit is a practical answer. The flange housing anchors to a flat surface at three points, holding the shaft securely. MR Industrial Accessories supplies this line and can help you pick the right variant based on shaft size and how it will be mounted.
The part number breaks down into meaningful blocks. The first letter, F, stands for the flange housing. The digit after it tells you how many fixing holes there are. Next, S identifies the mounted bearing series, M indicates the housing type, and the final number is the shaft diameter. Within the 200 series you'll find sizes like F3S2M20E, F3S2M25E, F3S2M30E, F3S2M35E and F3S2M40E, each covering a larger shaft while keeping the same basic design.
You'll spot these units on belt conveyors, bucket elevators, mixers, agitators, blowers and process lines in food, chemical and aggregate plants. The three-bolt flange lets you mount on sheet metal or welded structures with a set orientation, which helps when the shaft runs parallel to a wall or side space is tight.
Selection starts with shaft diameter and load type. Most applications see mainly radial loads, with some axial depending on how the unit is mounted. Consider the sealing needed for your environment, because dust, water or frequent washdowns call for different protection. During installation, set the flange on a flat, clean surface, tighten the three bolts evenly and check shaft alignment before startup. Lubrication and internal clearance follow the mounted bearing series.
For interchangeability, compare mounted units by shaft diameter, number of holes, distance between fixing centers and housing type. Diameter alone isn't enough; you also need to match flange geometry and shaft center height. If you're replacing an existing unit, send us the part number stamped on the housing or the flange dimensions, and we'll point you to a compatible alternative.
If you have the unit part number, shaft diameter or flange dimensions, send them via WhatsApp or email to MR Industrial Accessories. We'll quote the reference you need and get back to you promptly.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I identify the unit I need?
- Check the part number stamped on the housing, or measure the shaft diameter, the distance between flange holes and the center height. With that information we can suggest an equivalent reference from the Link-Belt 200 series.
- Can it be mounted in any position?
- The three-bolt flange allows various orientations depending on how the structure is machined. The key is a flat support surface, even bolt tightening and shaft alignment before startup.
- What should I consider for dusty or wet environments?
- Select the sealing based on the environment: abrasive dust, frequent washing or moisture each require different protection. Tell us where the unit will be mounted and we'll guide you to the most suitable variant.