LINK-BELT F3CL2B24N flange bearing 4 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- CL
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT F3CL2B24N belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F3CL2B24N and any equivalents.
Link-Belt CL series 4-bolt flange bearings are mounted units with a square flange housing and four mounting holes. They support rotating shafts on flat surfaces where the shaft runs perpendicular to the mounting plane, providing firm fastening and load capacity. MR Industrial Accessories supplies this line and offers help with selection and equivalents.
The CL series code breaks down into distinct parts: the leading F stands for the 4-bolt flange housing, the number following CL gives the nominal shaft diameter, and the trailing letters specify locking method and seal type. Units in this series share the same housing pattern and vary mainly by shaft size. Provide the complete code via WhatsApp and we will identify the exact replacement.
Typical applications include belt and roller conveyors, packaging lines, mixers, blowers, bucket elevators, and process lines in food, chemical, and aggregate plants. They are often chosen for replacement on equipment that already has a 4-bolt flange, allowing a mounted unit to be installed without modifying the structure.
When selecting, consider radial and axial loads, rotational speed, and the operating environment. In dusty or wet conditions, a more protective seal is recommended; if the shaft expands due to temperature changes, choose a unit with suitable internal clearance. During mounting, place the flange on a flat, clean surface, tighten the four bolts in a cross pattern, and verify shaft alignment before lubricating and starting up.
Flange-mounted units from different manufacturers can sometimes be interchanged based on hole count, center distance, shaft diameter, and locking type, but housing dimensions are not always identical. Always compare the flange drawing and shaft diameter before substituting one unit for another. Send us the original part number and we will suggest a compatible alternative.
MR Industrial Accessories manufactures split plummer block housings, ANSI chains, and sheaves, and also distributes bearings and power transmission components. Send the F3CL2B code from your equipment on WhatsApp, along with a photo of the flange if possible, and we will quote promptly.
Dimensions
- Bore
- 1 1/2 in
Frequently asked questions
- How do I identify the size of the Link-Belt CL series bearing I need?
- Find the code stamped on the housing or flange and send it complete via WhatsApp. The number after CL indicates the shaft diameter, and the final letters define locking and sealing. With that information, we will quote the correct unit.
- Can it be replaced by another brand of flange bearing?
- In many cases yes, if the number of holes, center distance, shaft diameter, and locking type match. Housing dimensions vary between manufacturers, so compare the flange drawing before installing. Send us the original code and we will indicate the alternative.
- What should I check before mounting a flange bearing?
- Ensure the mounting surface is flat and clean, tighten the four bolts in a cross pattern, and check that the shaft is aligned with the equipment. Lubricate according to the unit type and verify clearance before startup. If you have questions, contact us on WhatsApp.