LINK-BELT ER8KCL insert bearing
- Brand
- LINK-BELT
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- Centrik-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT ER8KCL belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ER8KCL and any equivalents.
The ER KCL insert from LINK-BELT is a ball bearing built with an extended inner ring and the Centrik-Lok locking arrangement, made to sit inside split plummer block or pillow block housings. It suits rotating shaft positions on conveyors, fans and process equipment where the fit has to stay firm and repeatable, and where mounting or removal should not harm the shaft surface.
Reading the code helps you order the right size. ER marks the extended inner ring family. The figure in the middle gives the nominal shaft diameter, so ER8KCL, ER10KCL and ER12KCL cover three different shafts, and the same logic runs through ER14KCL, ER15KCL, ER16KCL, ER18KCL and ER19KCL. K refers to the locking setup, while CL points to Centrik-Lok, the eccentric collar that clamps the inner ring onto the shaft.
Typical installations include belt and chain conveyors, bucket elevators, mixers, centrifugal fans, mills, screens, and machinery in food, cement, mining and chemical processing. Material handling systems and packaging lines also use them, since they mount easily and tolerate dirty surroundings.
When choosing a size, look at shaft diameter first, then whether the load is radial, axial or combined, and finally the working environment. Because Centrik-Lok locks without set screws, the shaft is left unmarked and the position can still be adjusted. Check that housings are aligned and that internal clearance is correct. Proper lubrication and the right seal matter most in dusty or damp areas.
These inserts interchange with other brands that use comparable locking methods, such as eccentric collar or set screw designs. For a quote, send the full part number along with your operating conditions so dimensional and functional fit can be confirmed. MR Industrial Accessories supplies this line and can point you to a suitable alternative.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- What does KCL indicate on a LINK-BELT insert bearing?
- KCL is the Centrik-Lok locking system. An eccentric collar grips the inner ring against the shaft, so mounting is quick and repeatable and removal does not damage the shaft. It fits equipment that sees regular maintenance.
- How do I pick the right ER KCL insert for my machine?
- Start with the shaft diameter, which is the number inside the part number, for example ER12KCL. Then consider the load type and the environment so the sealing suits the site. If anything is unclear, send the details and we will help.
- Can LINK-BELT ER KCL inserts replace other brands?
- In most cases they interchange with inserts from other makers that use the same style of locking, provided the main dimensions line up. Confirm shaft and housing dimensions before ordering, and we can assist with the equivalent.