LINK-BELT EPEB225M115YFH flange bearing 4 holes

LINK-BELT EPEB225M115YFH belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for EPEB225M115YFH and any equivalents.

LINK-BELT EPEB series 4-bolt flange mounted bearings ship as a complete assembly, with the bearing already fitted into its housing. Part numbers in this group include EPEB225M110YFH, EPEB225M115YFH and EPEB225M125YFH. The only difference between them is the figure that comes after the M.

The flange carries four mounting holes and bolts flat against a surface set at a right angle to the shaft, which could be a machine face, a frame or a closing plate. Spreading the fastening across four points keeps the unit firmly supported. Because the bearing and housing come together, fitting or swapping one out takes less work than building the two parts up on site.

Reading the code helps when ordering: EPEB225M comes first, then the number, then the YFH suffix, as in EPEB225M110YFH, EPEB225M115YFH and EPEB225M125YFH. That middle number is what separates one unit from the next. Note that EPEB is not the same prefix as EPB, which belongs to a different unit type.

Four things drive the choice: shaft diameter, the spacing between the mounting holes, the load, and the conditions the unit works in. When replacing an existing bearing, the fastest route is to read the complete part number stamped on the old unit, or measure the assembly. Either approach gives you what you need to match the replacement.

On installation, wipe the support surface and the shaft clean, ease the unit into place rather than forcing or hammering it, and tighten the fasteners evenly. Turn the shaft by hand to confirm it rotates smoothly and quietly before the machine runs. Follow the manufacturer's guidance for locking the unit to the shaft and for greasing.

For a quote, send the full part number, such as EPEB225M115YFH, along with the quantity by WhatsApp or email. A photo of the unit being replaced is helpful if you have it. The team answers quickly and can point you to equivalents or help you pick the right unit.