LINK-BELT EPEB224M60FH flange bearing 4 holes

LINK-BELT EPEB224M60FH belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for EPEB224M60FH and any equivalents.

The Link-Belt B22400 series 4-bolt flange bearing is a mounted unit designed to be bolted to a flat surface such as a wall, frame, or metal structure. It suits applications where the shaft runs perpendicular to the mounting plane and where firm fastening and good load capacity are needed. MR Industrial Accessories supplies this line and helps you select the correct size for your shaft and application.

The part number breaks down into distinct blocks. EPEB denotes the 4-bolt flange family. 224 is the base size within the B22400 series. The following M shows that the shaft diameter is given in millimeters, and the final digits state that diameter in millimeters. The FH suffix identifies the housing and mounting arrangement. For instance, EPEB224M60FH fits a 60 mm shaft, while EPEB224M100FH fits a 100 mm shaft. The complete code pinpoints each variant without ambiguity.

You will find these bearings in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, and process equipment. They are common in food, chemical, cement, and aggregate processing plants because they mount easily on existing structures. They also appear in agriculture, in dryers and storage facilities, and in the metallurgical industry. In every case, the 4-bolt flange provides firm fastening and straightforward alignment with the shaft.

When selecting a bearing, begin with the shaft diameter and the load type: radial, axial, or combined. Confirm that the mounting surface is flat and rigid and that the fastening holes line up with the flange. Sealing matters in dusty, wet, or frequently washed-down environments, so choose the appropriate protection. Follow the manufacturer's lubrication recommendation and renew it according to operating conditions. Align the shaft with the bearing before tightening to avoid parasitic stresses and extend service life.

Flange mounted bearings come from several brands, each with its own nomenclature. Equivalences are based on dimensions: shaft diameter, hole spacing, flange diameter, and center height. A similar code is not sufficient; you must compare the dimensional data sheet. If you are replacing an existing bearing, send us the original code or the flange dimensions and shaft diameter, and we will identify the compatible alternative from Link-Belt or another brand we supply.

MR Industrial Accessories supplies the Link-Belt line. If you already have your bearing code — for example, EPEB224M75FH — or the shaft dimensions, contact us on WhatsApp and we will quote it promptly. We also advise you if you need a variant with a different seal type or configuration for your equipment.