LINK-BELT DSHB22535H take-up bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- B536
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT DSHB22535H belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for DSHB22535H and any equivalents.
A Link-Belt DSHB take-up bearing keeps proper tension on chain and belt drives. Mounted on the slack side, it lets maintenance crews adjust tension so the chain or belt does not jump or wear too fast. MR Industrial Accessories LLC supplies this line to customers in the United States and several Latin American countries.
The DSHB code tells you the bearing type and the shaft size. In DSHB22531H, DSHB22535H and DSHB22539H, the middle digits change with the shaft: 22531, 22535 and 22539. The H at the end shows the mounting setup. The series sets the bearing size and how much load it can carry.
You will find these units on chain conveyors, bucket elevators, belt conveyors and belt drives in food, cement, mining and logistics operations. Their job is to take up slack and make up for stretch in the chain or belt as it runs.
When selecting, check the shaft diameter, the chain pitch or belt type, and the radial and axial loads. Install the take-up in line with the drive, bolt it down tight and verify axial clearance. Grease choice depends on the site: lithium or synthetic grease for the temperature and humidity you have. Seals keep dust and water out, so in harsh areas pick a version with reinforced seals.
Link-Belt take-up bearings can replace other brands that use similar designations. What matters is matching the shaft dimensions and mounting holes. For a replacement, send the full part number or the shaft dimensions and center distance, and we will point you to a compatible option.
MR Industrial Accessories LLC supplies the Link-Belt line. If you need a DSHB take-up bearing, message us on WhatsApp or email with the part number or model. We reply promptly and can suggest equivalents and help you choose. We also manufacture split plummer block housings, roller chains and sheaves.
Dimensions
- Bore
- 2 3/16 in
Frequently asked questions
- What does the code DSHB22531H mean?
- DSHB stands for a take-up bearing, 22531 is the shaft diameter and H is the mounting configuration. The middle number changes with the shaft, for example 22535 or 22539. Send the full part number and we will quote it.
- How do I pick the right take-up bearing?
- You need the shaft diameter, the chain or belt type and the loads. The environment also counts: with dust or water, a reinforced seal is a good idea. With that information we can advise you.
- Can they replace other brands?
- Yes, Link-Belt take-up bearings can replace other brands that use similar designations, as long as the shaft and mounting dimensions match. Send us the original part number and we will indicate the equivalent.