LINK-BELT DKLFXM02E20SP flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- Duralon
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT DKLFXM02E20SP belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for DKLFXM02E20SP and any equivalents.
Link-Belt's Duralon series 2-bolt flange mounted bearing arrives as a complete unit, pairing the bearing with a flange housing. It supports rotating shafts on flat surfaces where two anchor points provide stable mounting. MR Industrial Accessories LLC supplies this line and helps you identify the right variant for your equipment.
The Duralon code breaks into sections: the opening letters denote the housing style and nominal shaft diameter, while the numbers that follow give the size and flange arrangement. In a reference like DKLFXM02E20SP, the string packs the shaft diameter, housing type, and sealing into one code. Locate the full part number on your machine and send it over WhatsApp so we can point you to the matching reference.
Typical installations include belt conveyors, bucket elevators, mixers, agitators, and process lines in food, chemical, and aggregate plants. The flange housing simplifies alignment and bolting onto sheet metal or structural profiles. Duralon series bearings suit environments with moderate dust and humidity.
When selecting a mounted bearing, consider shaft diameter, load type (radial, axial, or combined), and operating conditions. Review the sealing: labyrinths and seals block contaminants and keep lubricant in place. During installation, seat the flange on a flat surface, tighten bolts in a cross pattern, and verify shaft alignment to prevent parasitic stresses. Proper lubrication and periodic re-tightening extend assembly life.
For equivalents, 2-bolt flange mounted bearings can interchange between manufacturers depending on series, shaft diameter, and sealing type. Matching the diameter alone is not sufficient: compare bolt hole spacing, flange outer diameter, and shaft locking method. If your equipment uses another brand, send us the part number and we will identify the compatible Link-Belt option.
To request a quote, send the complete part number via WhatsApp along with a photo of the housing and shaft dimensions. Our team replies promptly with the reference you need, and if you require a variant not listed, we source it or suggest an equivalent.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the Duralon designation mean in Link-Belt mounted bearings?
- Duralon identifies a series of 2-bolt flange mounted bearings. The code combines letters and numbers that indicate shaft diameter, housing type, and sealing. Send us your part number on WhatsApp and we will provide the exact reference.
- How do I choose the right flange mounted bearing for my machine?
- You need the shaft diameter, load type, and environmental conditions. Also check the flange bolt hole spacing and required sealing. With that data we can advise you on the correct Duralon series variant.
- Do you ship nationwide?
- Yes, we ship nationwide. We coordinate logistics based on your location. Write to us on WhatsApp with the bearing part number and we will quote promptly.