LINK-BELT CHBS2E26E hanger bearing

LINK-BELT CHBS2E26E belongs to hanger bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CHBS2E26E and any equivalents.

When a shaft has to be carried from above rather than from below, the Link-Belt hanger bracket is the mounted bearing that does the job. Its split housing hangs from the supporting structure, so the shaft can be aligned, inspected or taken out without dismantling the surrounding equipment. MR Industrial Accessories LLC supplies this line to process, cement, mining and material handling operations across the United States, Canada, Mexico and South America.

The code tells you what you are holding. CHBS2E20E, CHBS2E26E and CHBS2E32E all start with the letters that mark the split hanger bracket family, followed by the series number 2. The E stands for the contact seal version, and the last two digits give the shaft diameter the housing is machined for: 20, 26 or 32. Ordering with the full code keeps the bracket from being mixed up with other series from the same brand.

You will find these units on belt conveyors, bucket elevators, screw conveyors and crushing plant belts, in cement works, quarries, aggregate plants, sugar mills and food facilities. Hanging the bearing from the upper structure keeps the shaft layout simple and absorbs the misalignment that shows up on long runs or on equipment that vibrates.

Selection comes down to two checks: the shaft diameter and the thread pitch of the mounting. The contact seal keeps dust and moisture out, but it still needs proper lubrication and a periodic clearance check. Set the housing in line with the shaft before you tighten the bolts, and do not strike the seal during mounting. This series is built for moderate loads and the speeds found in continuous conveying.

Link-Belt hanger brackets can replace mounted bearings of similar configuration and series from other makers. What defines the match is shaft diameter, fastening type and housing dimensions, so comparing codes alone is not enough, the mounting height and the sealing system have to be checked too. If you are swapping one brand for another, send us the details and we will point you to the compatible option.

Have the code CHBS2E20E, CHBS2E26E or CHBS2E32E, or just your equipment model? Send it over WhatsApp or email and we will quote the Link-Belt hanger bracket and walk you through installation. Custom split brackets are also manufactured to order.