LINK-BELT CHBS230E hanger bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT CHBS230E belongs to hanger bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CHBS230E and any equivalents.
A Link-Belt CHBS hanger bracket is a mounted bearing designed to be fixed to an overhead frame, where it carries and aligns a rotating drive shaft. It provides an intermediate support point along the shaft, which is common in screw conveyors, cardan shafts and extended drive lines. MR Industrial Accessories LLC supplies this series and assists with part number selection based on shaft diameter and mounting arrangement.
The CHBS code breaks down as follows: CH stands for the hanger bracket family, B denotes the split housing style, and S refers to the mounting configuration. The numeric portion that follows indicates the bearing size and ties to the shaft diameter. A trailing E marks a construction variant in the series. With those details you can pinpoint the exact part number and request a quote on WhatsApp.
Typical installations include food, cement, mining and aggregate processing plants, particularly on screw conveyors and drive shafts that require support at intervals. These brackets also appear in continuous process equipment where the shaft carries moderate radial load and must stay aligned. The robust mounting and the ability to regrease are important where production continuity matters.
When selecting a bracket, consider shaft diameter, radial load and rotation speed. Hanger mounting calls for a rigid support structure and alignment with adjacent support points. Check the sealing arrangement: in dusty or damp conditions, extra protection is recommended. Use the lubricant specified for the inner bearing and renew it according to the duty cycle. The CHBS series can be regreased, which helps extend service life in demanding environments.
For equivalents, hanger brackets from various brands are matched by shaft diameter, housing type and mounting configuration. A similar part number is not sufficient; dimensions and mounting method must be cross-referenced. MR Industrial Accessories LLC can identify a compatible alternative. Sending a photo or assembly drawing helps avoid interchange errors.
To request a Link-Belt CHBS hanger bracket, contact us on WhatsApp with the complete part number or the shaft diameter. MR Industrial Accessories LLC replies promptly with a quote and, when needed, helps confirm the correct variant for your application. We can also advise on mounting and lubrication for proper operation.
Dimensions
- Bore
- 1 7/8 in
Frequently asked questions
- How do I determine the right CHBS part number for my shaft?
- The number in the part number correlates with shaft diameter. Measure the shaft with a caliper and send the measurement along with a photo of the existing bracket. We will then identify the exact CHBS part number and provide a quote on WhatsApp.
- Is regreasing possible on this hanger bracket?
- Yes, the CHBS series is designed for regreasing. Frequency depends on speed, load and environment. In dusty or wet conditions, check the lubricant condition more often and renew it as part of your maintenance plan.
- Can I use a Link-Belt CHBS to replace a bracket from another brand?
- Often yes, but shaft diameter, housing type and mounting method must be compared. Do not rely on the part number alone. Send us the dimensions or drawing and we will confirm the equivalent before quoting.